[PATCH 23/24] mtd: spinand: winbond: Add comment about naming

[Tudor Ambarus]

On 11/11/24 2:38 PM, Tudor Ambarus wrote:
> 
> 
> On 10/25/24 5:15 PM, Miquel Raynal wrote:
>> Make the link between the core macros and the datasheet.
>>
>> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
>> ---
>>  drivers/mtd/nand/spi/winbond.c | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
>> index 686e872fe0ff..9e2562805d23 100644
>> --- a/drivers/mtd/nand/spi/winbond.c
>> +++ b/drivers/mtd/nand/spi/winbond.c
>> @@ -18,6 +18,11 @@
>>  
>>  #define W25N04KV_STATUS_ECC_5_8_BITFLIPS	(3 << 4)
>>  
>> +/*
>> + * "X2" in the core is equivalent to "dual output" in the datasheets,
>> + * "X4" in the core is equivalent to "quad output" in the datasheets.
>> + */
> 
> doesn't help great for an outsider like me. Is quad referring to cmd,
> addr or data? Or maybe of all? I need to read the code anyway.

more straight forward would be to use the X-Y-Z terminology in the
comment, where X,Y and Z are the number of IO lines for cmd, address and
data.

>> +
>>  static SPINAND_OP_VARIANTS(read_cache_dtr_variants,
>>  		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
>>  		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),