[PATCH 18/24] mtd: spinand: Add an optional frequency to read from cache macros

[Tudor Ambarus]

On 10/25/24 5:14 PM, Miquel Raynal wrote:
> While the SPINAND_PAGE_READ_FROM_CACHE_FAST_OP macro is supposed to be
> able to run at the highest supported frequency, it is not the case of

what do you mean by highest supported frequency? Is it the max freq
between the ones supported by the controller, pcb and flash?

> the regular read from cache, which may be limited in terms of maximum
> frequency. Add an optional argument to this macro, which will be used to
> set the maximum frequency, if any.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
>  include/linux/mtd/spinand.h | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
> index 3730cdf914f8..6064029c5e05 100644
> --- a/include/linux/mtd/spinand.h
> +++ b/include/linux/mtd/spinand.h
> @@ -62,11 +62,12 @@
>  		   SPI_MEM_OP_NO_DUMMY,					\
>  		   SPI_MEM_OP_NO_DATA)
>  
> -#define SPINAND_PAGE_READ_FROM_CACHE_OP(addr, ndummy, buf, len) \
> +#define SPINAND_PAGE_READ_FROM_CACHE_OP(addr, ndummy, buf, len, ...) \
>  	SPI_MEM_OP(SPI_MEM_OP_CMD(0x03, 1),				\
>  		   SPI_MEM_OP_ADDR(2, addr, 1),				\
>  		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
> -		   SPI_MEM_OP_DATA_IN(len, buf, 1))
> +		   SPI_MEM_OP_DATA_IN(len, buf, 1),			\
> +		   __VA_OPT__(SPI_MEM_OP_MAX_FREQ(__VA_ARGS__)))
>  
>  #define SPINAND_PAGE_READ_FROM_CACHE_FAST_OP(addr, ndummy, buf, len) \
>  	SPI_MEM_OP(SPI_MEM_OP_CMD(0x0b, 1),			\