[PATCH mtd-utils v2 RESEND 093/102] tests: ubifs_tools: fsck_tests: Add powercut+fsck+mount test
Zhihao Cheng
chengzhihao1 at huawei.com
Mon Nov 11 01:08:21 PST 2024
Inject powercut while doing fsstress on mounted UBIFS for kinds of
flashes (eg. nand, nor).
This testcase mainly makes sure that fsck.ubifs can make UBIFS image
be consistent on different flashes (eg. nand, nor). Because the
min_io_size of nor flash is 1, the UBIFS image on nor flash will be
different from nand flash after doing powercut, so we need make sure
fsck.ubifs can handle these two types of flash.
Signed-off-by: Zhihao Cheng <chengzhihao1 at huawei.com>
---
.gitignore | 1 +
configure.ac | 3 +-
tests/ubifs_tools-tests/Makemodule.am | 3 +-
.../fsck_tests/powercut_fsck_mount.sh.in | 148 +++++++++++++++++++++
4 files changed, 153 insertions(+), 2 deletions(-)
create mode 100755 tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh.in
diff --git a/.gitignore b/.gitignore
index 7de38e86..b63b9868 100644
--- a/.gitignore
+++ b/.gitignore
@@ -116,6 +116,7 @@ tests/ubi-tests/ubi-stress-test.sh
tests/ubifs_tools-tests/lib/common.sh
tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh
tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh
+tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh
#
# Files generated by autotools
diff --git a/configure.ac b/configure.ac
index bcd9b63a..460109e7 100644
--- a/configure.ac
+++ b/configure.ac
@@ -295,7 +295,8 @@ AC_CONFIG_FILES([tests/fs-tests/fs_help_all.sh
tests/ubi-tests/ubi-stress-test.sh
tests/ubifs_tools-tests/lib/common.sh
tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh
- tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh])
+ tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh
+ tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh])
AC_OUTPUT([Makefile])
diff --git a/tests/ubifs_tools-tests/Makemodule.am b/tests/ubifs_tools-tests/Makemodule.am
index 68c77a62..d54514da 100644
--- a/tests/ubifs_tools-tests/Makemodule.am
+++ b/tests/ubifs_tools-tests/Makemodule.am
@@ -1,4 +1,5 @@
test_SCRIPTS += \
tests/ubifs_tools-tests/lib/common.sh \
tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh \
- tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh
+ tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh \
+ tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh
diff --git a/tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh.in b/tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh.in
new file mode 100755
index 00000000..ac7128bd
--- /dev/null
+++ b/tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh.in
@@ -0,0 +1,148 @@
+#!/bin/sh
+# Copyright (c), 2024, Huawei Technologies Co, Ltd.
+# Author: Zhihao Cheng <chengzhihao1 at huawei.com>
+#
+# Test Description:
+# For many kinds of flash, do following things
+# 1. mount UBIFS
+# 2. fsstress & powercut & unmount
+# 3. fsck UBIFS
+# 4. check UBIFS mounting result
+# Running time: 1h
+
+TESTBINDIR=@TESTBINDIR@
+source $TESTBINDIR/common.sh
+
+function run_test()
+{
+ local simulator="$1";
+ local size="$2";
+ local peb_size="$3";
+ local page_size="$4";
+ local encryption=$5;
+
+ echo "======================================================================"
+ printf "%s" "$simulator: ${size}MiB PEB size ${peb_size}KiB"
+ if [ "$simulator" = "nandsim" ]; then
+ printf " %s" "page size ${page_size}Bytes"
+ fi
+ printf " $encryption\n"
+
+ if [ "$simulator" = "nandsim" ]; then
+ $TESTBINDIR/load_nandsim.sh "$size" "$peb_size" "$page_size" || echo "cannot load nandsim";
+ mtdnum="$(find_mtd_device "$nandsim_patt")"
+ elif [ "$simulator" = "mtdram" ]; then
+ load_mtdram "$size" "$peb_size" || echo "cannot load mtdram"
+ mtdnum="$(find_mtd_device "$mtdram_patt")"
+ else
+ fatal "$simulator is not supported"
+ fi
+
+ flash_eraseall /dev/mtd$mtdnum
+ modprobe ubi mtd="$mtdnum,$page_size" || fatal "modprobe ubi fail"
+ ubimkvol -N vol_test -m -n 0 /dev/ubi$UBI_NUM || fatal "mkvol fail"
+ modprobe ubifs || fatal "modprobe ubifs fail"
+ mount_ubifs $DEV $MNT || fatal "mount ubifs fail"
+ if [[ "$encryption" == "encrypted" ]]; then
+ encryption_gen_key
+ encryption_set_key $MNT
+ fi
+
+ fsstress -d $MNT -l0 -p4 -n10000 &
+ sleep $((RANDOM % 120))
+ powercut
+
+ ps -e | grep -w fsstress > /dev/null 2>&1
+ while [ $? -eq 0 ]
+ do
+ killall -9 fsstress > /dev/null 2>&1
+ sleep 1
+ ps -e | grep -w fsstress > /dev/null 2>&1
+ done
+
+ while true
+ do
+ res=`mount | grep "$MNT"`
+ if [[ "$res" == "" ]]
+ then
+ break;
+ fi
+ umount $MNT
+ sleep 0.1
+ done
+
+ fsck.ubifs -a $DEV 2>&1 > $LOG_FILE
+ res=$?
+ cat $LOG_FILE
+ if [[ $res != $FSCK_OK ]]
+ then
+ # Powercut during layout_leb_in_gaps may change index LEBs
+ # without updating LPT.
+ idx_log=`cat $LOG_FILE | grep "Inconsistent properties" | grep "is_idx 1"`
+ # The lpt nodes could be parsed incorrectly because the lpt disk
+ # layout is too simple. See details in
+ # https://lore.kernel.org/linux-mtd/97ca7fe4-4ad4-edd1-e97a-1d540aeabe2d@huawei.com/
+ lpt_log=`cat $LOG_FILE | grep "dbg_check_ltab_lnum: invalid empty space in LEB"`
+ if [[ "$idx_log" == "" ]] && [[ "$lpt_log" == "" ]]; then
+ fatal "fsck fail $res"
+ fi
+ if [[ $res != $FSCK_NONDESTRUCT ]]; then
+ fatal "fsck fail $res"
+ fi
+ fi
+
+ dmesg -c > /dev/null # powercut could reproduce error messages
+
+ enable_chkfs
+
+ mount_ubifs $DEV $MNT "noauthentication" "noatime"
+ res=$?
+ if [[ $res != 0 ]]
+ then
+ fatal "mount fail $res"
+ fi
+
+ if [[ "$encryption" == "encrypted" ]]; then
+ encryption_set_key $MNT
+ fi
+
+ du -sh $MNT > /dev/null # Make sure all files are accessible
+ ret=$?
+ if [[ $ret != 0 ]]; then
+ fatal "Cannot access all files"
+ fi
+ check_err_msg
+
+ umount $MNT
+ res=$?
+ if [[ $res != 0 ]]
+ then
+ fatal "unmount fail $res"
+ fi
+
+ check_err_msg
+
+ modprobe -r ubifs
+ modprobe -r ubi
+ modprobe -r $simulator
+
+ echo "----------------------------------------------------------------------"
+}
+
+check_fsstress
+start_t=$(date +%s)
+echo "Do powercut+fsck+mount test in kinds of flashes"
+for simulator in "mtdram" "nandsim"; do
+ for encryption in "encrypted" "noencrypted"; do
+ run_test "$simulator" "16" "16" "512" $encryption
+ run_test "$simulator" "64" "16" "512" $encryption
+ run_test "$simulator" "128" "64" "2048" $encryption
+ run_test "$simulator" "256" "128" "2048" $encryption
+ run_test "$simulator" "512" "128" "2048" $encryption
+ run_test "$simulator" "1024" "512" "2048" $encryption
+ done
+done
+end_t=$(date +%s)
+time_cost=$(( end_t - start_t ))
+echo "Success, cost $time_cost seconds"
+exit 0
--
2.13.6
More information about the linux-mtd
mailing list