[PATCH v2 5/6] arm64: dts: imx8-ss-conn: add gpmi nand node

[Frank Li]

Add gpmi nand support.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 69 +++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index 4aaf5a0c1ed8a..a4a10ce03bfe0 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -28,6 +28,13 @@ conn_ipg_clk: clock-conn-ipg {
 	clock-output-names = "conn_ipg_clk";
 };
 
+conn_bch_clk: clock-conn-bch {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <400000000>;
+	clock-output-names = "conn_bch_clk";
+};
+
 conn_subsys: bus at 5b000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
@@ -302,4 +309,66 @@ usb3_lpcg: clock-controller at 5b280000 {
 				     "usb3_aclk";
 		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
 	};
+
+	rawnand_0_lpcg: clock-controller at 5b290000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b290000 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "gpmi_bch",
+				     "gpmi_io",
+				     "gpmi_apb",
+				     "gpmi_bch_apb";
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	rawnand_4_lpcg: clock-controller at 5b290004 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b290004 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "apbhdma_hclk";
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	dma_apbh: dma-controller at 5b810000 {
+		compatible = "fsl,imx8qxp-dma-apbh", "fsl,imx28-dma-apbh";
+		reg = <0x5b810000 0x2000>;
+		interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		dma-channels = <4>;
+		clocks = <&rawnand_4_lpcg IMX_LPCG_CLK_0>;
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	gpmi: nand-controller at 5b812000{
+		compatible = "fsl,imx8qxp-gpmi-nand";
+		reg = <0x5b812000 0x2000>, <0x5b814000 0x2000>;
+		reg-names = "gpmi-nand", "bch";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "bch";
+		clocks = <&rawnand_0_lpcg IMX_LPCG_CLK_1>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_4>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_0>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "gpmi_io", "gpmi_apb",
+			      "gpmi_bch", "gpmi_bch_apb";
+		dmas = <&dma_apbh 0>;
+		dma-names = "rx-tx";
+		power-domains = <&pd IMX_SC_R_NAND>;
+		assigned-clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>;
+		assigned-clock-rates = <50000000>;
+		status = "disabled";
+	};
 };

-- 
2.34.1