[PATCH 3/5] mtd: rawnand: gpmi: add iMX8QXP support.

Frank Li Frank.Li at nxp.com
Fri May 17 11:09:50 PDT 2024


From: Han Xu <han.xu at nxp.com>

Add "fsl,imx8qxp-gpmi-nand" compatible string. iMX8QXP gpmi nand is similar
with iMX7D. But it using 4 clock: "gpmi_io", "gpmi_apb", "gpmi_bch" and
"gpmi_bch_apb".

Signed-off-by: Han Xu <han.xu at nxp.com>
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 20 +++++++++++++++++---
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h |  4 ++++
 2 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index e71ad2fcec232..f90c5207bacb6 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -983,7 +983,8 @@ static int gpmi_setup_interface(struct nand_chip *chip, int chipnr,
 		return PTR_ERR(sdr);
 
 	/* Only MX28/MX6 GPMI controller can reach EDO timings */
-	if (sdr->tRC_min <= 25000 && !GPMI_IS_MX28(this) && !GPMI_IS_MX6(this))
+	if (sdr->tRC_min <= 25000 && !GPMI_IS_MX28(this) &&
+	    !(GPMI_IS_MX6(this) || GPMI_IS_MX8(this)))
 		return -ENOTSUPP;
 
 	/* Stop here if this call was just a check */
@@ -1178,6 +1179,18 @@ static const struct gpmi_devdata gpmi_devdata_imx7d = {
 	.clks_count = ARRAY_SIZE(gpmi_clks_for_mx7d),
 };
 
+static const char *gpmi_clks_for_mx8qxp[GPMI_CLK_MAX] = {
+	"gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb",
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx8qxp = {
+	.type = IS_MX8QXP,
+	.bch_max_ecc_strength = 62,
+	.max_chain_delay = 12000,
+	.clks = gpmi_clks_for_mx8qxp,
+	.clks_count = ARRAY_SIZE(gpmi_clks_for_mx8qxp),
+};
+
 static int acquire_register_block(struct gpmi_nand_data *this,
 				  const char *res_name)
 {
@@ -2281,7 +2294,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
 	 *  (1) the chip is imx6, and
 	 *  (2) the size of the ECC parity is byte aligned.
 	 */
-	if (GPMI_IS_MX6(this) &&
+	if ((GPMI_IS_MX6(this) || GPMI_IS_MX8(this))  &&
 		((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
 		ecc->read_subpage = gpmi_ecc_read_subpage;
 		chip->options |= NAND_SUBPAGE_READ;
@@ -2692,7 +2705,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	this->base.ops = &gpmi_nand_controller_ops;
 	chip->controller = &this->base;
 
-	ret = nand_scan(chip, GPMI_IS_MX6(this) ? 2 : 1);
+	ret = nand_scan(chip, (GPMI_IS_MX6(this) || GPMI_IS_MX8(this)) ? 2 : 1);
 	if (ret)
 		goto err_out;
 
@@ -2721,6 +2734,7 @@ static const struct of_device_id gpmi_nand_id_table[] = {
 	{ .compatible = "fsl,imx6q-gpmi-nand", .data = &gpmi_devdata_imx6q, },
 	{ .compatible = "fsl,imx6sx-gpmi-nand", .data = &gpmi_devdata_imx6sx, },
 	{ .compatible = "fsl,imx7d-gpmi-nand", .data = &gpmi_devdata_imx7d,},
+	{ .compatible = "fsl,imx8qxp-gpmi-nand", .data = &gpmi_devdata_imx8qxp, },
 	{}
 };
 MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
index c3ff56ac62a7e..502f01a8338c3 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
@@ -78,6 +78,7 @@ enum gpmi_type {
 	IS_MX6Q,
 	IS_MX6SX,
 	IS_MX7D,
+	IS_MX8QXP,
 };
 
 struct gpmi_devdata {
@@ -172,8 +173,11 @@ struct gpmi_nand_data {
 #define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
 #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
 #define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)
+#define GPMI_IS_MX8QXP(x)	((x)->devdata->type == IS_MX8QXP)
 
 #define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \
 				 GPMI_IS_MX7D(x))
+
+#define GPMI_IS_MX8(x)		(GPMI_IS_MX8QXP(x))
 #define GPMI_IS_MXS(x)		(GPMI_IS_MX23(x) || GPMI_IS_MX28(x))
 #endif

-- 
2.34.1




More information about the linux-mtd mailing list