[PATCH 2/3] dt-bindings: mtd: atmel-nand: add atmel pmecc

[Balamanikandan Gunasundar]

Add bindings for programmable multibit error correction code controller
(PMECC).

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar at microchip.com>
---
 .../devicetree/bindings/mtd/atmel-nand.txt         | 70 ----------------------
 .../devicetree/bindings/mtd/atmel-pmecc.yaml       | 58 ++++++++++++++++++
 2 files changed, 58 insertions(+), 70 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index e332515c499a..1934614a9298 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -1,73 +1,3 @@
-* ECC engine (PMECC) bindings:
-
-Required properties:
-- compatible: should be one of the following
-	"atmel,at91sam9g45-pmecc"
-	"atmel,sama5d4-pmecc"
-	"atmel,sama5d2-pmecc"
-	"microchip,sam9x60-pmecc"
-	"microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc"
-- reg: should contain 2 register ranges. The first one is pointing to the PMECC
-       block, and the second one to the PMECC_ERRLOC block.
-
-* SAMA5 NFC I/O bindings:
-
-SAMA5 SoCs embed an advanced NAND controller logic to automate READ/WRITE page
-operations. This interface to this logic is placed in a separate I/O range and
-should thus have its own DT node.
-
-- compatible: should be "atmel,sama5d3-nfc-io", "syscon".
-- reg: should contain the I/O range used to interact with the NFC logic.
-
-Example:
-
-	nfc_io: nfc-io at 70000000 {
-		compatible = "atmel,sama5d3-nfc-io", "syscon";
-		reg = <0x70000000 0x8000000>;
-	};
-
-	pmecc: ecc-engine at ffffc070 {
-		compatible = "atmel,at91sam9g45-pmecc";
-                reg = <0xffffc070 0x490>,
-                      <0xffffc500 0x100>;
-	};
-
-	ebi: ebi at 10000000 {
-		compatible = "atmel,sama5d3-ebi";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		atmel,smc = <&hsmc>;
-		reg = <0x10000000 0x10000000
-		       0x40000000 0x30000000>;
-		ranges = <0x0 0x0 0x10000000 0x10000000
-			  0x1 0x0 0x40000000 0x10000000
-			  0x2 0x0 0x50000000 0x10000000
-			  0x3 0x0 0x60000000 0x10000000>;
-		clocks = <&mck>;
-
-                nand_controller: nand-controller {
-			compatible = "atmel,sama5d3-nand-controller";
-			atmel,nfc-sram = <&nfc_sram>;
-			atmel,nfc-io = <&nfc_io>;
-			ecc-engine = <&pmecc>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges;
-
-			nand at 3 {
-				reg = <0x3 0x0 0x800000>;
-				atmel,rb = <0>;
-
-				/*
-				 * Put generic NAND/MTD properties and
-				 * subnodes here.
-				 */
-			};
-		};
-	};
-
------------------------------------------------------------------------
-
 Deprecated bindings (should not be used in new device trees):
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/mtd/atmel-pmecc.yaml b/Documentation/devicetree/bindings/mtd/atmel-pmecc.yaml
new file mode 100644
index 000000000000..872401e9dda3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-pmecc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/atmel-pmecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip pmecc controller
+
+maintainers:
+  - Balamanikandan Gunasundar <balamanikandan.gunasundar at microchip.com>
+
+description: |
+  Bindings for microchip Programmable Multibit Error Correction Code
+  Controller (PMECC). pmecc is a programmable BCH encoder/decoder. This
+  block is passed as the value to the "ecc-engine" property of microchip
+  nand flash controller node.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91sam9g45-pmecc
+          - atmel,sama5d2-pmecc
+          - atmel,sama5d4-pmecc
+          - microchip,sam9x60-pmecc
+          - microchip,sam9x7-pmecc
+      - items:
+          - const: microchip,sam9x60-pmecc
+          - const: atmel,at91sam9g45-pmecc
+
+  reg:
+    description:
+      The first should point to the PMECC block. The second should point to the
+      PMECC_ERRLOC block.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,sam9x7-pmecc
+    then:
+      properties:
+        clocks:
+          description:
+            The clock source for pmecc controller
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pmecc: ecc-engine at ffffc070 {
+            compatible = "microchip,sam9x7-pmecc";
+            reg = <0xffffe000 0x300>,
+                  <0xffffe600 0x100>;
+            clocks = <&pmc 2 48>;
+    };

-- 
2.25.1