[PATCH v3 1/5] spi: dt-bindings: add binding doc for spi-qpic-snand

[Md Sadre Alam]

On 3/7/2024 1:16 PM, Krzysztof Kozlowski wrote:
> On 07/03/2024 05:17, Md Sadre Alam wrote:
> 
> There is no commit msg.
Sorry missed it. Will add in next patch
> 
> Subject did not improve. This is a friendly reminder during the review
> process.
Ok
> 
> It seems my or other reviewer's previous comments were not fully
> addressed. Maybe the feedback got lost between the quotes, maybe you
> just forgot to apply it. Please go back to the previous discussion and
> either implement all requested changes or keep discussing them.
> 
> Thank you.

  Sorry, Will re-check all the previous comment and try to fix in
  next patch.
> 
> 
>> Co-developed-by: Sricharan Ramabadhran <quic_srichara at quicinc.com>
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara at quicinc.com>
>> Co-developed-by: Varadarajan Narayanan <quic_varada at quicinc.com>
>> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
>> Signed-off-by: Md Sadre Alam <quic_mdalam at quicinc.com>
>> ---
>> Change in [v3]
>>
>> * Updated commit message, removed "dt-bindings" from commit
>>    message
>>
>> * Updated compatible name as file name
>>
>> * Added hardware description
>>
>> * Documented clock-name
>>
>> * Moved dma-names property to top
>>
>> * Droped unused label "qpic_nand"
>>
>> * Fixed indentation in example dt node
>>
>> Change in [v2]
>>
>> * Added initial support for dt-bindings
>>
>> Change in [v1]
>>
>> * This patch was not included in [v1]
>>   
>>   .../bindings/spi/qcom,spi-qpic-snand.yaml     | 83 +++++++++++++++++++
>>   1 file changed, 83 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
>> new file mode 100644
>> index 000000000000..3d20a4bc567f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
>> @@ -0,0 +1,83 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/spi/qcom,spi-qpic-snand.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm QPIC NAND controller
>> +
>> +maintainers:
>> +  - Md sadre Alam <quic_mdalam at quicinc.com>
>> +
>> +description: |
> 
> Do not need '|' unless you need to preserve formatting.
Ok will do in next patch.
> 
>> +  The QCOM QPI-SPI-NAND flash controller is an extended version of
>> +  the QCOM QPIC NAND flash controller. It can work both in serial
>> +  and parallel mode. It supports typical SPI-NAND page cache
>> +  operations in single, dual or quad IO mode with pipelined ECC
>> +  encoding/decoding using the QPIC ECC HW engine.
>> +
>> +allOf:
>> +  - $ref: /schemas/spi/spi-controller.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,spi-qpic-snand
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    minItems: 3
> 
> Drop
Ok will do in next patch.
> 
>> +    maxItems: 3
>> +
>> +  clock-names:
>> +    items:
>> +      - const: core
>> +      - const: aon
>> +      - const: iom
> 
> Missing blank line
Ok will do in next patch.
> 
>> +  dmas:
>> +    items:
>> +      - description: tx DMA channel
>> +      - description: rx DMA channel
>> +      - description: cmd DMA channel
>> +
>> +  dma-names:
>> +    items:
>> +      - const: tx
>> +      - const: rx
>> +      - const: cmd
>> +
> 
> 
> Best regards,
> Krzysztof
>