[PATCH v7] mtd: rawnand: brcmnand: Add support for getting ecc setting from strap

[Miquel Raynal]

Hi William,

william.zhang at broadcom.com wrote on Thu, 29 Feb 2024 15:39:25 -0800:

> Hi Miquel,
> 
> On 2/29/24 02:28, Miquel Raynal wrote:
> > Hi William,
> > 
> > william.zhang at broadcom.com wrote on Tue, 27 Feb 2024 12:12:52 -0800:
> >   
> >> This is the update to the patch 12 in the original series [1] that was
> >> applied to nand-next except this patch.  
> > 
> > This is context. While interesting, it should not be part of the commit
> > log but instead located...
> >   
> >>
> >> BCMBCA broadband SoC based board design does not specify ecc setting in
> >> dts but rather use the SoC NAND strap info to obtain the ecc strength
> >> and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for
> >> this purpose and update driver to support this option. However these two
> >> options can not be used at the same time.
> >>
> >> Signed-off-by: William Zhang <william.zhang at broadcom.com>
> >> Reviewed-by: David Regan <dregan at broadcom.com>
> >>
> >> [1] https://lore.kernel.org/lkml/20240223034758.13753-1-william.zhang@broadcom.com/  
> > 
> > This as well should be below.  
> >>
> >> ---  
> > 
> > ...here.
> >   
> Sorry accidentally put these info in the commit log.  Should be in the revision history.  Let me know if you want to send a new version.

Yes please, it's easier for me.

Thanks,
Miquèl