[PATCH 02/26] sd: move zone limits setup out of sd_read_block_characteristics

Damien Le Moal dlemoal at kernel.org
Mon Jun 10 22:51:24 PDT 2024


On 6/11/24 2:19 PM, Christoph Hellwig wrote:
> Move a bit of code that sets up the zone flag and the write granularity
> into sd_zbc_read_zones to be with the rest of the zoned limits.
> 
> Signed-off-by: Christoph Hellwig <hch at lst.de>
> ---
>  drivers/scsi/sd.c     | 21 +--------------------
>  drivers/scsi/sd_zbc.c | 13 ++++++++++++-
>  2 files changed, 13 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
> index 85b45345a27739..5bfed61c70db8f 100644
> --- a/drivers/scsi/sd.c
> +++ b/drivers/scsi/sd.c
> @@ -3308,29 +3308,10 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp,
>  		blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q);
>  	}
>  
> -
> -#ifdef CONFIG_BLK_DEV_ZONED /* sd_probe rejects ZBD devices early otherwise */
> -	if (sdkp->device->type == TYPE_ZBC) {
> -		lim->zoned = true;
> -
> -		/*
> -		 * Per ZBC and ZAC specifications, writes in sequential write
> -		 * required zones of host-managed devices must be aligned to
> -		 * the device physical block size.
> -		 */
> -		lim->zone_write_granularity = sdkp->physical_block_size;
> -	} else {
> -		/*
> -		 * Host-aware devices are treated as conventional.
> -		 */
> -		lim->zoned = false;
> -	}
> -#endif /* CONFIG_BLK_DEV_ZONED */
> -
>  	if (!sdkp->first_scan)
>  		return;
>  
> -	if (lim->zoned)
> +	if (sdkp->device->type == TYPE_ZBC)

Nit: use sd_is_zoned() here ?

>  		sd_printk(KERN_NOTICE, sdkp, "Host-managed zoned block device\n");
>  	else if (sdkp->zoned == 1)
>  		sd_printk(KERN_NOTICE, sdkp, "Host-aware SMR disk used as regular disk\n");
> diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
> index 422eaed8457227..e9501db0450be3 100644
> --- a/drivers/scsi/sd_zbc.c
> +++ b/drivers/scsi/sd_zbc.c
> @@ -598,8 +598,19 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, struct queue_limits *lim,
>  	u32 zone_blocks = 0;
>  	int ret;
>  
> -	if (!sd_is_zoned(sdkp))
> +	if (!sd_is_zoned(sdkp)) {
> +		lim->zoned = false;

Maybe we should clear the other zone related limits here ? If the drive is
reformatted/converted from SMR to CMR (FORMAT WITH PRESET), the other zone
limits may be set already, no ?

>  		return 0;
> +	}
> +
> +	lim->zoned = true;
> +
> +	/*
> +	 * Per ZBC and ZAC specifications, writes in sequential write required
> +	 * zones of host-managed devices must be aligned to the device physical
> +	 * block size.
> +	 */
> +	lim->zone_write_granularity = sdkp->physical_block_size;
>  
>  	/* READ16/WRITE16/SYNC16 is mandatory for ZBC devices */
>  	sdkp->device->use_16_for_rw = 1;

-- 
Damien Le Moal
Western Digital Research




More information about the linux-mtd mailing list