Subject: [PATCH] mtd: spi-nor: add support for MRAM Everspin EM008LXB
claus.fabig at emerson.com
claus.fabig at emerson.com
Thu Jul 18 01:57:24 PDT 2024
From: Claus Fabig <claus.fabig at emerson.com>
Date: Thu, 18 Jul 2024 09:53:36 +0200
Subject: [PATCH] mtd: spi-nor: add support for MRAM Everspin EM008LXB
The Everspin EM008LXB MRAM has 8Mb and is populated on a custom board
using Microchip's PCI12000 spi host controller running on low 30MHz clock.
According to Everspin Read Fast (0xb) command below 60MHz is neither
specified and nor tested. Test shows that using Read Fast (0xb) will
result in reading inconsistent data in this setup but writing is fine, so
only supporting Read (0x3) command should be acceptable for the moment.
The device is JEDEC compatible (JESD251 and JESD251-1) but not able to
provide SFDP information.
For spec v3.2 refer to www.everspin.com/file/158315/download.
Successfully tested according to
www.kernel.org/doc/html/latest/driver-api/mtd/spi-nor.html:
cat /sys/bus/spi/devices/spi-EMR5555\:00/spi-nor/partname
em008lxb
cat /sys/bus/spi/devices/spi-EMR5555\:00/spi-nor/manufacturer
everspin
cat /sys/kernel/debug/spi-nor/spi-EMR5555\:00/capabilities
Supported read modes by the flash
1S-1S-1S
opcode 0x03
mode cycles 0
dummy cycles 0
Supported page program modes by the flash
1S-1S-1S
opcode 0x02
cat /sys/kernel/debug/spi-nor/spi-EMR5555\:00/params
name em008lxb
id (null)
size 1.00 MiB
write size 1
page size 256
address nbytes 3
flags HAS_SR_TB | HAS_16BIT_SR | HAS_4BIT_BP | HAS_SR_BP3_BIT6
opcodes
read 0x03
dummy cycles 0
erase 0xd8
program 0x02
8D extension none
protocols
read 1S-1S-1S
write 1S-1S-1S
register 1S-1S-1S
erase commands
d8 (1.00 MiB) [0]
c7 (1.00 MiB)
sector map
region (in hex) | erase mask | overlaid
------------------+------------+----------
00000000-000fffff | [0 ] | no
cat /proc/mtd
dev: size erasesize name
mtd0: 00020000 00020000 "spi-EMR1010:00"
mtd1: 00100000 00100000 "spi-EMR5555:00"
mtd_debug info /dev/mtd1
mtd.type = MTD_NORFLASH
mtd.flags = MTD_CAP_NORFLASH
mtd.size = 1048576 (1M)
mtd.erasesize = 1048576 (1M)
mtd.writesize = 1
mtd.oobsize = 0
regions = 0
dd if=/dev/urandom of=spi_test bs=1M count=1
mtd_debug erase /dev/mtd1 0 1048576
mtd_debug read /dev/mtd1 0 1048576 spi_read
Copied 1048576 bytes from address 0x00000000 in flash to spi_read
hexdump spi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0100000
sha256sum spi_read
f5fb04aa5b882706b9309e885f19477261336ef76a150c3b4d3489dfac3953ec spi_read
mtd_debug write /dev/mtd1 0 1048576 spi_test
Copied 1048576 bytes from spi_test to address 0x00000000 in flash
mtd_debug read /dev/mtd1 0 1048576 spi_read
Copied 1048576 bytes from address 0x00000000 in flash to spi_read
sha256sum spi*
cf9a1f3f4089602d194d67d1a918a574a5ca1d9aa71d391a661818c1f0ee1aab spi_read
cf9a1f3f4089602d194d67d1a918a574a5ca1d9aa71d391a661818c1f0ee1aab spi_test
Signed-off-by: claus.fabig at emerson.com
---
drivers/mtd/spi-nor/core.c | 2 +-
drivers/mtd/spi-nor/everspin.c | 5 +++++
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index e0c4efc424f4..95267d9e8b65 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3713,7 +3713,7 @@ static const struct spi_device_id spi_nor_dev_ids[] = {
{ "mr25h256" }, /* 256 Kib, 40 MHz */
{ "mr25h10" }, /* 1 Mib, 40 MHz */
{ "mr25h40" }, /* 4 Mib, 40 MHz */
-
+ { "em008lxb" }, /* 8 Mib, 133 MHz */
{ },
};
MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids);
diff --git a/drivers/mtd/spi-nor/everspin.c b/drivers/mtd/spi-nor/everspin.c
index add37104d673..c1f004c39c1c 100644
--- a/drivers/mtd/spi-nor/everspin.c
+++ b/drivers/mtd/spi-nor/everspin.c
@@ -31,6 +31,11 @@ static const struct flash_info everspin_nor_parts[] = {
.size = SZ_512K,
.sector_size = SZ_512K,
.flags = SPI_NOR_NO_ERASE,
+ }, {
+ .name = "em008lxb",
+ .size = SZ_1M,
+ .sector_size = SZ_1M,
+ .flags = SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6,
}
};
--
2.45.2
More information about the linux-mtd
mailing list