[PATCH v3 06/10] mtd: rawnand: brcmnand: Add support for getting ecc setting from strap

Miquel Raynal miquel.raynal at bootlin.com
Wed Jan 24 09:32:07 PST 2024


Hi David,

> @@ -2622,19 +2667,43 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
>  		nanddev_get_memorg(&chip->base);
>  	struct brcmnand_controller *ctrl = host->ctrl;
>  	struct brcmnand_cfg *cfg = &host->hwcfg;
> -	char msg[128];
> +	struct device_node *np = nand_get_flash_node(chip);
>  	u32 offs, tmp, oob_sector;
> -	int ret;
> +	int ret, sector_size_1k = 0;
> +	bool use_strap = false;
> +	char msg[128];
>  
>  	memset(cfg, 0, sizeof(*cfg));
> +	use_strap = of_property_read_bool(np, "brcm,nand-ecc-use-strap");
>  
> -	ret = of_property_read_u32(nand_get_flash_node(chip),
> -				   "brcm,nand-oob-sector-size",
> +	/*
> +	 * Set ECC size and strength based on hw configuration from strap
> +	 * if device tree does not specify them and use strap property is set
> +	 * If ecc strength is set in dts, don't use strap setting.
> +	 */

You would have to use the strap settings only if the property is set.
If not property is set, the default from the core should apply I guess.

> +	if (chip->ecc.strength)
> +		use_strap = 0;
> +
> +	if (use_strap) {
> +		chip->ecc.strength = brcmnand_get_ecc_strength(host);
> +		sector_size_1k = brcmnand_get_sector_size_1k(host);
> +		if (chip->ecc.size == 0) {
> +			if (sector_size_1k < 0)
> +				chip->ecc.size = 512;
> +			else
> +				chip->ecc.size = 512 << sector_size_1k;
> +		}
> +	}
> +
> +	ret = of_property_read_u32(np, "brcm,nand-oob-sector-size",
>  				   &oob_sector);
>  	if (ret) {
> -		/* Use detected size */
> -		cfg->spare_area_size = mtd->oobsize /
> -					(mtd->writesize >> FC_SHIFT);
> +		if (use_strap)
> +			cfg->spare_area_size = brcmnand_get_spare_size(host);
> +		else
> +			/* Use detected size */
> +			cfg->spare_area_size = mtd->oobsize /
> +						(mtd->writesize >> FC_SHIFT);
>  	} else {
>  		cfg->spare_area_size = oob_sector;
>  	}


Thanks,
Miquèl



More information about the linux-mtd mailing list