[PATCH v5 09/12] mtd: rawnand: brcmnand: Add support for getting ecc setting from strap

[Miquel Raynal]

Hi William,

william.zhang at broadcom.com wrote on Wed,  7 Feb 2024 12:22:54 -0800:

> BCMBCA broadband SoC based board design does not specify ecc setting in
> dts but rather use the SoC NAND strap info to obtain the ecc strength
> and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for
> this purpose and update driver to support this option.
> 
> The generic nand ecc settings still take precedence over this flag. For

And this sentence can also be dropped. Please mention they cannot be
used at the same time.

> example, if nand-ecc-strength is set in the dts, the driver ignores the
> strap setting and falls back to original behavior. This makes sure that
> the existing BCMBCA board dts still works the old way even the strap
> flag is set in the BCMBCA chip dtsi.

I think I already said this was a bad idea IMHO :-)

Thanks,
Miquèl