[PATCH v3 1/3] mtd: mchp48l640: make WEL behaviour configurable

[Jonas Rebmann]

From: David Jander <david at protonic.nl>

The 48L640 resets the WEL bit (the Write Enable Latch bit in the status
register) to zero on the completion of write operations. In preparation
to support chips behaving differently, introduce .auto_disable_wel
capability, and, if it's missing, explicitly reset the WEL bit after
writes.

Signed-off-by: David Jander <david at protonic.nl>
Reviewed-by: Heiko Schocher <hs at denx.de>
Signed-off-by: Jonas Rebmann <jre at pengutronix.de>
---
 drivers/mtd/devices/mchp48l640.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/devices/mchp48l640.c b/drivers/mtd/devices/mchp48l640.c
index f576e6a890e859e7d20aeeb2ede4ca0acf4850fc..4cdd24aaed416fc7e40a8060b5c7eaf6684fc6d5 100644
--- a/drivers/mtd/devices/mchp48l640.c
+++ b/drivers/mtd/devices/mchp48l640.c
@@ -27,6 +27,7 @@
 struct mchp48_caps {
 	unsigned int size;
 	unsigned int page_size;
+	bool auto_disable_wel;
 };
 
 struct mchp48l640_flash {
@@ -194,9 +195,15 @@ static int mchp48l640_write_page(struct mtd_info *mtd, loff_t to, size_t len,
 	else
 		goto fail;
 
-	ret = mchp48l640_waitforbit(flash, MCHP48L640_STATUS_WEL, false);
-	if (ret)
-		goto fail;
+	if (flash->caps->auto_disable_wel) {
+		ret = mchp48l640_waitforbit(flash, MCHP48L640_STATUS_WEL, false);
+		if (ret)
+			goto fail;
+	} else {
+		ret = mchp48l640_write_prepare(flash, false);
+		if (ret)
+			goto fail;
+	}
 
 	kfree(cmd);
 	return 0;
@@ -293,6 +300,7 @@ static int mchp48l640_read(struct mtd_info *mtd, loff_t from, size_t len,
 static const struct mchp48_caps mchp48l640_caps = {
 	.size = SZ_8K,
 	.page_size = 32,
+	.auto_disable_wel = true,
 };
 
 static int mchp48l640_probe(struct spi_device *spi)

-- 
2.39.5