[PATCH v5 1/2] mtd: spinand: Add support for setting plane select bits
Cheng Ming Lin
linchengming884 at gmail.com
Fri Aug 30 03:03:09 PDT 2024
From: Cheng Ming Lin <chengminglin at mxic.com.tw>
Add two flags for inserting the Plane Select bit into the column
address during the write_to_cache and the read_from_cache operation.
Add the SPINAND_HAS_PP_PLANE_SELECT_BIT flag for serial NAND flash
that require inserting the Plane Select bit into the column address
during the write_to_cache operation.
Add the SPINAND_HAS_READ_PLANE_SELECT_BIT flag for serial NAND flash
that require inserting the Plane Select bit into the column address
during the read_from_cache operation.
Signed-off-by: Cheng Ming Lin <chengminglin at mxic.com.tw>
---
drivers/mtd/nand/spi/core.c | 6 ++++++
include/linux/mtd/spinand.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index e0b6715e5dfe..e7b592cdbb4c 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -386,6 +386,9 @@ static int spinand_read_from_cache_op(struct spinand_device *spinand,
else
rdesc = spinand->dirmaps[req->pos.plane].rdesc_ecc;
+ if (spinand->flags & SPINAND_HAS_READ_PLANE_SELECT_BIT)
+ column |= req->pos.plane << fls(nanddev_page_size(nand));
+
while (nbytes) {
ret = spi_mem_dirmap_read(rdesc, column, nbytes, buf);
if (ret < 0)
@@ -460,6 +463,9 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
else
wdesc = spinand->dirmaps[req->pos.plane].wdesc_ecc;
+ if (spinand->flags & SPINAND_HAS_PROG_PLANE_SELECT_BIT)
+ column |= req->pos.plane << fls(nanddev_page_size(nand));
+
while (nbytes) {
ret = spi_mem_dirmap_write(wdesc, column, nbytes, buf);
if (ret < 0)
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 5c19ead60499..0e0df620da53 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -312,6 +312,8 @@ struct spinand_ecc_info {
#define SPINAND_HAS_QE_BIT BIT(0)
#define SPINAND_HAS_CR_FEAT_BIT BIT(1)
+#define SPINAND_HAS_PROG_PLANE_SELECT_BIT BIT(2)
+#define SPINAND_HAS_READ_PLANE_SELECT_BIT BIT(3)
/**
* struct spinand_ondie_ecc_conf - private SPI-NAND on-die ECC engine structure
--
2.25.1
More information about the linux-mtd
mailing list