[PATCH v4 1/2] mtd: spinand: Add support for the flag

Cheng Ming Lin linchengming884 at gmail.com
Wed Aug 28 20:25:16 PDT 2024


From: Cheng Ming Lin <chengminglin at mxic.com.tw>

Add two flags for inserting the Plane Select bit into the column
address during the write_to_cache and the read_from_cache operation.

Add the SPINAND_HAS_PP_PLANE_SELECT_BIT flag for serial NAND flash
that require inserting the Plane Select bit into the column address
during the write_to_cache operation.

Add the SPINAND_HAS_READ_PLANE_SELECT_BIT flag for serial NAND flash
that require inserting the Plane Select bit into the column address
during the read_from_cache operation.

Signed-off-by: Cheng Ming Lin <chengminglin at mxic.com.tw>
---
 drivers/mtd/nand/spi/core.c | 6 ++++++
 include/linux/mtd/spinand.h | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index e0b6715e5dfe..49f2d66c3a9c 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -386,6 +386,9 @@ static int spinand_read_from_cache_op(struct spinand_device *spinand,
 	else
 		rdesc = spinand->dirmaps[req->pos.plane].rdesc_ecc;
 
+	if (spinand->flags & SPINAND_HAS_READ_PLANE_SELECT_BIT)
+		column |= req->pos.plane << fls(nanddev_page_size(nand));
+
 	while (nbytes) {
 		ret = spi_mem_dirmap_read(rdesc, column, nbytes, buf);
 		if (ret < 0)
@@ -460,6 +463,9 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
 	else
 		wdesc = spinand->dirmaps[req->pos.plane].wdesc_ecc;
 
+	if (spinand->flags & SPINAND_HAS_PP_PLANE_SELECT_BIT)
+		column |= req->pos.plane << fls(nanddev_page_size(nand));
+
 	while (nbytes) {
 		ret = spi_mem_dirmap_write(wdesc, column, nbytes, buf);
 		if (ret < 0)
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 5c19ead60499..cec451e7c71c 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -312,6 +312,8 @@ struct spinand_ecc_info {
 
 #define SPINAND_HAS_QE_BIT		BIT(0)
 #define SPINAND_HAS_CR_FEAT_BIT		BIT(1)
+#define SPINAND_HAS_PP_PLANE_SELECT_BIT		BIT(2)
+#define SPINAND_HAS_READ_PLANE_SELECT_BIT		BIT(3)
 
 /**
  * struct spinand_ondie_ecc_conf - private SPI-NAND on-die ECC engine structure
-- 
2.25.1




More information about the linux-mtd mailing list