[PATCH v3 1/1] mtd: spinand: Add flags for the Plane Select bit

[Cheng Ming Lin]

Hi Miquel,

Miquel Raynal <miquel.raynal at bootlin.com> 於 2024年8月28日 週三 下午5:52寫道：
>
> Hi Cheng,
>
> > > > @@ -263,7 +266,7 @@ static const struct spinand_info macronix_spinand_table[] = {
> > > >                    SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> > > >                                             &write_cache_variants,
> > > >                                             &update_cache_variants),
> > > > -                  SPINAND_HAS_QE_BIT,
> > > > +                  SPINAND_HAS_QE_BIT | SPINAND_HAS_PP_PLANE_SELECT_BIT,
> > > >                    SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
> > > >                                    mx35lf1ge4ab_ecc_get_status)),
> > > >       SPINAND_INFO("MX35UF2G24AD-Z4I8",
> > > > diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
> > > > index 5c19ead60499..cec451e7c71c 100644
> > > > --- a/include/linux/mtd/spinand.h
> > > > +++ b/include/linux/mtd/spinand.h
> > > > @@ -312,6 +312,8 @@ struct spinand_ecc_info {
> > > >
> > > >  #define SPINAND_HAS_QE_BIT           BIT(0)
> > > >  #define SPINAND_HAS_CR_FEAT_BIT              BIT(1)
> > > > +#define SPINAND_HAS_PP_PLANE_SELECT_BIT              BIT(2)
> > > > +#define SPINAND_HAS_READ_PLANE_SELECT_BIT            BIT(3)
> > >
> > > Do you think we can have the PP plane select bit without the read plane
> > > select bit? I'd use a single flag for now.
> >
> > Macronix serial NAND flash with a two-plane structure always requires
> > the insertion of the Plane Select bit in the write_to_cache function. However,
> > only the MX35{U,F}2G14AC and MX35LF2GE4AB require the insertion of the
> > Plane Select bit in the read_from_cache function.
> >
> > However, I have observed that for flash requiring the insertion of the
> > Plane Select
> > bit during the read_from_cache operation, the ECC strength is 4.
> >
> > Can we use the ECC strength in conjunction with the
> > SPINAND_HAS_PP_PLANE_SELECT_BIT flag to determine
> > whether the Plane Select bit needs to be inserted during the
> > read_from_cache operation?
> >
> > This method cannot guarantee that a new flash witha two-plane
> > structure requiring the insertion of the Plane Select bit will have
> > an ECC strength of 4.
> >
> > Based on the above points, I think we need to use two separate flags
> > to handle these requirements effectively.
>
> Indeed, please use two flags.

No problem, thanks!

>
> Thanks,
> Miquèl

Thanks,
Cheng Ming Lin