[PATCH v2 2/2] mtd: rawnand: nuvoton: add new driver for the Nuvoton MA35 SoC

[Hui-Ping Chen]

Dear Krzysztof,

Thank you for your reply.



On 2024/8/19 下午 07:19, Krzysztof Kozlowski wrote:
> On Mon, Aug 19, 2024 at 09:20:37AM +0000, Hui-Ping Chen wrote:
>> Nuvoton MA35 SoCs NAND Flash Interface Controller
>> supports 2KB, 4KB and 8KB page size, and up to 8-bit,
>> 12-bit, and 24-bit hardware ECC calculation circuit
>> to protect data communication.
>>
>> Signed-off-by: Hui-Ping Chen <hpchen0nvt at gmail.com>
> ...
>
>> +static int ma35_nand_probe(struct platform_device *pdev)
>> +{
>> +	struct ma35_nand_info *nand;
>> +	struct nand_chip *chip;
>> +	struct mtd_info *mtd;
>> +	int retval = 0;
>> +
>> +	nand = devm_kzalloc(&pdev->dev, sizeof(*nand), GFP_KERNEL);
>> +	if (!nand)
>> +		return -ENOMEM;
>> +
>> +	nand_controller_init(&nand->controller);
>> +
>> +	nand->regs = devm_platform_ioremap_resource(pdev, 0);
>> +	if (IS_ERR(nand->regs))
>> +		return PTR_ERR(nand->regs);
>> +
>> +	nand->dev = &pdev->dev;
>> +	chip = &nand->chip;
>> +	mtd = nand_to_mtd(chip);
>> +	nand_set_controller_data(chip, nand);
>> +	nand_set_flash_node(chip, pdev->dev.of_node);
>> +
>> +	mtd->priv = chip;
>> +	mtd->owner = THIS_MODULE;
>> +	mtd->dev.parent = &pdev->dev;
>> +
>> +	nand->clk = devm_clk_get(&pdev->dev, "nand_gate");
>> +	if (IS_ERR(nand->clk))
>> +		return dev_err_probe(&pdev->dev, PTR_ERR(nand->clk),
>> +				     "failed to find nand clock\n");
>> +
>> +	retval = clk_prepare_enable(nand->clk);
>> +	if (retval < 0) {
>> +		dev_err(&pdev->dev, "failed to enable clock\n");
>> +		retval = -ENXIO;
>> +	}
>> +
>> +	nand->chip.controller    = &nand->controller;
>> +
>> +	chip->legacy.cmdfunc     = ma35_nand_command;
>> +	chip->legacy.waitfunc    = ma35_waitfunc;
>> +	chip->legacy.read_byte   = ma35_nand_read_byte;
>> +	chip->legacy.select_chip = ma35_nand_select_chip;
>> +	chip->legacy.read_buf    = ma35_read_buf_dma;
>> +	chip->legacy.write_buf   = ma35_write_buf_dma;
>> +	chip->legacy.dev_ready   = ma35_nand_devready;
>> +	chip->legacy.chip_delay  = 25; /* us */
>> +
>> +	/* Read OOB data first, then HW read page */
>> +	chip->ecc.hwctl      = ma35_nand_enable_hwecc;
>> +	chip->ecc.calculate  = ma35_nand_calculate_ecc;
>> +	chip->ecc.correct    = ma35_nand_correct_data;
>> +	chip->ecc.write_page = ma35_nand_write_page_hwecc;
>> +	chip->ecc.read_page  = ma35_nand_read_page_hwecc_oob_first;
>> +	chip->ecc.read_oob   = ma35_nand_read_oob_hwecc;
>> +	chip->options |= (NAND_NO_SUBPAGE_WRITE | NAND_USES_DMA);
>> +
>> +	ma35_nand_initialize(nand);
>> +	platform_set_drvdata(pdev, nand);
>> +
>> +	nand->controller.ops = &ma35_nand_controller_ops;
>> +
>> +	nand->irq = platform_get_irq(pdev, 0);
>> +	if (nand->irq < 0)
>> +		return dev_err_probe(&pdev->dev, nand->irq,
>> +				     "failed to get platform irq\n");
>> +
>> +	if (request_irq(nand->irq, ma35_nand_irq, IRQF_TRIGGER_HIGH, "ma35d1-nand", nand)) {
>> +		dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
>> +		return -ENXIO;
>> +	}
>> +
>> +	retval = nand_scan(chip, 1);
>> +	if (retval)
>> +		return retval;
>> +
>> +	if (mtd_device_register(mtd, nand->parts, nand->nr_parts)) {
>> +		nand_cleanup(chip);
>> +		devm_kfree(&pdev->dev, nand);
>> +		return retval;
>> +	}
>> +
>> +	return retval;
>> +}
>> +
>> +static void ma35_nand_remove(struct platform_device *pdev)
>> +{
>> +	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
>> +	struct nand_chip *chip = &nand->chip;
>> +	int ret;
>> +
> Where do you release IRQ handler?

I will add a release IRQ handler to this function.



>> +	ret = mtd_device_unregister(nand_to_mtd(chip));
>> +	WARN_ON(ret);
>> +	nand_cleanup(chip);
>> +
>> +	clk_disable_unprepare(nand->clk);
>> +
>> +	kfree(nand);
> NAK, you never tested your code.

I will strengthen the testing of this function.



>> +	platform_set_drvdata(pdev, NULL);
> Why? Drop.

I will remove it.



>> +}
>> +
>> +/* PM Support */
>> +#ifdef CONFIG_PM
>> +static int ma35_nand_suspend(struct platform_device *pdev, pm_message_t pm)
>> +{
>> +	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
>> +	unsigned long timeo = jiffies + HZ/2;
>> +
>> +	/* wait DMAC to ready */
>> +	while (1) {
>> +		if ((readl(nand->regs + MA35_NFI_REG_DMACTL) & DMA_BUSY) == 0)
>> +			break;
>> +		if (time_after(jiffies, timeo))
>> +			return -ETIMEDOUT;
>> +	}
>> +
>> +	clk_disable(nand->clk);
>> +
>> +	return 0;
>> +}
>> +
>> +static int ma35_nand_resume(struct platform_device *pdev)
>> +{
>> +	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
>> +
>> +	clk_enable(nand->clk);
>> +	ma35_nand_hwecc_init(nand);
>> +	ma35_nand_dmac_init(nand);
>> +
>> +	return 0;
>> +}
>> +
>> +#else
>> +#define ma35_nand_suspend NULL
>> +#define ma35_nand_resume NULL
>> +#endif
>> +
>> +static const struct of_device_id ma35_nfi_of_match[] = {
>> +	{ .compatible = "nuvoton,ma35d1-nand" },
>> +	{},
>> +};
>> +MODULE_DEVICE_TABLE(of, ma35_nfi_of_match);
>> +
>> +static struct platform_driver ma35_nand_driver = {
>> +		.driver = {
> Messed indentation.

I will fix it.



>> +		.name   = "ma35d1-nand",
>> +		.owner  = THIS_MODULE,
> Drop. Please do not upstream some 10 year old code... Use recent code as
> template, not 10yo stuff...

I will refer to the new driver implementation.



> Best regards,
> Krzysztof


Best regards,

Hui-Ping Chen