[PATCH] mtd: spinand: set bitflip_threshold to 75% of ECC strength

[Daniel Golle]

Reporting an unclean read from SPI-NAND only when the maximum number
of correctable bitflip errors has been hit seems a bit late.
UBI LEB scrubbing, which depends on the lower MTD device reporting
correctable bitflips, then only kicks in when it's almost too late.

Set bitflip_threshold to 75% of the ECC strength, which is also the
default for raw NAND.

Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
 drivers/mtd/nand/spi/core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index e0b6715e5dfed..018c854d06193 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -1287,6 +1287,7 @@ static int spinand_init(struct spinand_device *spinand)
 	/* Propagate ECC information to mtd_info */
 	mtd->ecc_strength = nanddev_get_ecc_conf(nand)->strength;
 	mtd->ecc_step_size = nanddev_get_ecc_conf(nand)->step_size;
+	mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
 
 	ret = spinand_create_dirmaps(spinand);
 	if (ret) {
-- 
2.46.0