[PATCH v11 1/2] dt-bindings: mtd: fixed-partitions: Add alignment properties

Simon Glass sjg at chromium.org
Fri Apr 12 08:32:48 PDT 2024


Add three properties for controlling alignment of partitions, aka
'entries' in fixed-partition.

For now there is no explicit mention of hierarchy, so a 'section' is
just the 'fixed-partitions' node.

These new properties are inputs to the Binman packaging process, but are
also needed if the firmware is repacked, to ensure that alignment
constraints are not violated. Therefore they are provided as part of
the schema.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Rob Herring <robh at kernel.org>
---

Changes in v11:
- Drop mention of Binman
- Use 'content' instead of 'contents'

Changes in v10:
- Update the minimum to 2

Changes in v9:
- Move binding example to next batch to avoid build error

Changes in v7:
- Drop patch 'Add binman compatible'
- Put the alignment properties into the fixed-partition binding

Changes in v6:
- Correct schema-validation errors missed due to older dt-schema
  (enum fix and reg addition)

Changes in v5:
- Add value ranges
- Consistently mention alignment must be power-of-2
- Mention that alignment refers to bytes

Changes in v2:
- Fix 'a' typo in commit message

 .../bindings/mtd/partitions/partition.yaml    | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
index 1ebe9e2347ea..31bbeb161396 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -57,6 +57,57 @@ properties:
       user space from
     type: boolean
 
+  align:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2
+    maximum: 0x80000000
+    multipleOf: 2
+    description:
+      This sets the alignment of the entry in bytes.
+
+      The entry offset is adjusted so that the entry starts on an aligned
+      boundary within the containing section or image. For example ‘align =
+      <16>’ means that the entry will start on a 16-byte boundary. This may
+      mean that padding is added before the entry. The padding is part of
+      the containing section but is not included in the entry, meaning that
+      an empty space may be created before the entry starts. Alignment
+      must be a power of 2. If ‘align’ is not provided, no alignment is
+      performed.
+
+  align-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2
+    maximum: 0x80000000
+    multipleOf: 2
+    description:
+      This sets the alignment of the entry size in bytes. It must be a power
+      of 2.
+
+      For example, to ensure that the size of an entry is a multiple of 64
+      bytes, set this to 64. While this does not affect the content of the
+      entry itself (the padding is performed only when its parent section is
+      assembled), the end result is that the entry ends with the padding
+      bytes, so may grow. If ‘align-size’ is not provided, no alignment is
+      performed.
+
+  align-end:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2
+    maximum: 0x80000000
+    multipleOf: 2
+    description:
+      This sets the alignment (in bytes) of the end of an entry with respect
+      to the containing section. It must be a power of 2.
+
+      Some entries require that they end on an alignment boundary,
+      regardless of where they start. This does not move the start of the
+      entry, so the content of the entry will still start at the beginning.
+      But there may be padding at the end. While this does not affect the
+      content of the entry itself (the padding is performed only when its
+      parent section is assembled), the end result is that the entry ends
+      with the padding bytes, so may grow. If ‘align-end’ is not provided,
+      no alignment is performed.
+
 if:
   not:
     required: [ reg ]
-- 
2.34.1




More information about the linux-mtd mailing list