[PATCH v4 3/5] spi: spi-qpic: Add qpic spi nand driver support

[Alex G.]

On 4/7/24 13:40, Alex G. wrote:
> 
> 
> On 4/7/24 12:48, Alex G. wrote:
>> On 3/8/24 03:17, Md Sadre Alam wrote:
>>> Add qpic spi nand driver support. The spi nand
>>> driver currently supported the below commands.
>>>
>>> -- RESET
>>> -- READ ID
>>> -- SET FEATURE
>>> -- GET FEATURE
>>> -- READ PAGE
>>> -- WRITE PAGE
>>> -- ERASE PAGE
>>>
>>> Co-developed-by: Sricharan Ramabadhran <quic_srichara at quicinc.com>
>>> Signed-off-by: Sricharan Ramabadhran <quic_srichara at quicinc.com>
>>> Co-developed-by: Varadarajan Narayanan <quic_varada at quicinc.com>
>>> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
>>> Signed-off-by: Md Sadre Alam <quic_mdalam at quicinc.com>
>>> ---
>>
>> For the entire series:
>>
>> Tested-by: Alexandru Gagniuc <mr.nuke.me at gmail.com>
>>
>>> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
>>> index bc7021da2fe9..63764e943d82 100644
>>> --- a/drivers/spi/Kconfig
>>> +++ b/drivers/spi/Kconfig
>>> @@ -882,6 +882,14 @@ config SPI_QCOM_QSPI
>>>       help
>>>         QSPI(Quad SPI) driver for Qualcomm QSPI controller.
>>> +config SPI_QPIC_SNAND
>>> +    tristate "QPIC SNAND controller"
> 
> Also, don't tristate this. It can be set as CONFIG_QPIC_COMMON=m, which 
> will cause the build to fail because you don't have a MODULE_LICENSE().

Please disregard my idiotic suggestion here. I meant to make this 
comment on the previous patch.

>>> +    depends on ARCH_QCOM || COMPILE_TEST
>>
>> Here, it needs to 'select QPIC_COMMON`. Otherwise it can run into 
>> unresolved symbols:
>>
>> : drivers/spi/spi-qpic-snand.o: in function `snandc_set_reg':
>>   drivers/spi/spi-qpic-snand.c:56:(.text+0x484): undefined reference 
>> to `qcom_offset_to_nandc_reg'
>> ...
>>
>>> +    help
>>> +      QPIC_SNAND (QPIC SPI NAND) driver for Qualcomm QPIC controller.
>>> +      QPIC controller supports both parallel nand and serial nand.
>>> +      This config will enable serial nand driver for QPIC controller.
>>> +
>>>   config SPI_QUP
>>>       tristate "Qualcomm SPI controller with QUP interface"
>>>       depends on ARCH_QCOM || COMPILE_TEST
>>
>> Alex
> Alex