[PATCH v1] mtd: spinand: Add support for 5-byte IDs

[Greg KH]

On Thu, Apr 04, 2024 at 03:15:21PM +0300, Dmitry Rokosov wrote:
> From: Ezra Buehler <ezra.buehler at husqvarnagroup.com>
> 
> [ Upstream commit 34a956739d295de6010cdaafeed698ccbba87ea4 ]

This commit is already in the following releases:
	6.6.24 6.7.12 6.8.3 6.9-rc1

> E.g. ESMT chips will return an identification code with a length of 5
> bytes. In order to prevent ambiguity, flash chips would actually need to
> return IDs that are up to 17 or more bytes long due to JEDEC's
> continuation scheme. I understand that if a manufacturer ID is located
> in bank N of JEDEC's database (there are currently 16 banks), N - 1
> continuation codes (7Fh) need to be added to the identification code
> (comprising of manufacturer ID and device ID). However, most flash chip
> manufacturers don't seem to implement this (correctly).
> 
> Cc: <stable at vger.kernel.org> # 6.6.23
> Cc: <stable at vger.kernel.org> # 6.7.11
> Cc: <stable at vger.kernel.org> # 6.8.2
> Signed-off-by: Ezra Buehler <ezra.buehler at husqvarnagroup.com>
> Reviewed-by: Martin Kurbanov <mmkurbanov at salutedevices.com>
> Tested-by: Martin Kurbanov <mmkurbanov at salutedevices.com>
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> Link: https://lore.kernel.org/linux-mtd/20240125200108.24374-2-ezra@easyb.ch
> Signed-off-by: Dmitry Rokosov <ddrokosov at salutedevices.com>
> ---
> 
> In the patch series [1] only one patch was marked with Fixes tag, that's
> why the secon patch was not applied to 6.6.y, 6.7.y and 6.8y. It breaks
> ESMT detection flow with logs:
> 
> [    0.770730] spi-nand spi0.0: unknown raw ID c8017f7f
> [    0.772688] spi-nand: probe of spi0.0 failed with error -524
> 
> Please cherry-pick the second patch from the series to 6.6.y, 6.7.y and
> 6.8.y.

What commit id is "the second patch" here?  The one referenced above?
If so, again, this is already in a released kernel, so I'm confused as
to what to do here.

thanks,

greg k-h