[PATCH 2/3] mtd: rawnand: arasan: Ensure program page operations are successful

[Miquel Raynal]

On Mon, 2023-07-17 at 19:42:20 UTC, Miquel Raynal wrote:
> The NAND core complies with the ONFI specification, which itself
> mentions that after any program or erase operation, a status check
> should be performed to see whether the operation was finished *and*
> successful.
> 
> The NAND core offers helpers to finish a page write (sending the
> "PAGE PROG" command, waiting for the NAND chip to be ready again, and
> checking the operation status). But in some cases, advanced controller
> drivers might want to optimize this and craft their own page write
> helper to leverage additional hardware capabilities, thus not always
> using the core facilities.
> 
> Some drivers, like this one, do not use the core helper to finish a page
> write because the final cycles are automatically managed by the
> hardware. In this case, the additional care must be taken to manually
> perform the final status check.
> 
> Let's read the NAND chip status at the end of the page write helper and
> return -EIO upon error.
> 
> Cc: Michal Simek <michal.simek at amd.com>
> Cc: stable at vger.kernel.org
> Fixes: 88ffef1b65cf ("mtd: rawnand: arasan: Support the hardware BCH ECC engine")
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> Acked-by: Michal Smek <michal.simek at amd.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/fixes.

Miquel