[PATCH] dt-bindings: mtd: jedec,spi-nor: Document support for more MT25QU parts

[Geert Uytterhoeven]

Hi Tudor,

On Thu, Sep 21, 2023 at 4:45 PM Tudor Ambarus <tudor.ambarus at linaro.org> wrote:
> Sorry for the delay, I just noticed this while cleaning the patchwork log.
> On 12/6/22 08:32, Geert Uytterhoeven wrote:
> > On Mon, Dec 5, 2022 at 5:33 PM Rob Herring <robh at kernel.org> wrote:
> >> On Fri, Dec 02, 2022 at 02:56:01PM +0100, Geert Uytterhoeven wrote:
> >>> On Fri, Dec 2, 2022 at 2:50 PM Michael Walle <michael at walle.cc> wrote:
> >>>> Am 2022-12-02 14:37, schrieb Geert Uytterhoeven:
> >>>>> Document support for the Micron MT25QU256A and MT25QU512A Serial NOR
> >>>>> FLASHes.
> >>>>>
> >>>>> Merge the new entries with the existing entry for MT25QU02G.
> >>>>>
> >>>>> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
> >>>>> ---
> >>>>> mt25qu512a is already in active use, causing "make dtbs_check" errors.
> >>>>> mt25qu256a is supported by the Linux spi-nor driver, but there are no
> >>>>> upstream users yet.
> >>>>
> >>>> Is it encouraged to use the specific compatible with SPI-NOR flashes?
> >>>> As far as I know it isn't. The spi-nor subsys tries hard to identify
> >>>> any flashes at runtime and any additional information in the device tree
> >>>> is used as a last resort (just for flashes which doesn't support the
> >>>> read jedec id command yet). And usually boards have different sources
> >>>> for flash chips, so hardcoding a particular part in the device tree
> >>>> doesn't make sense.
> >>>
> >>> Thanks, I am aware there have been pushbacks when trying to
> >>> document more compatible values.
> >>>
> >>> IMHO either all or none of them should be documented.
> >>> If device-specific compatible values are discouraged, the bindings
> >>> should be updated to reflect that, and document a single compatible
> >>> value ("jedec,spi-nor") only.
> >>
> >> That's already allowed, so there's your answer.
> >
> > It's indeed allowed, but the alternative is documented, too (for some
> > values).
> >
> >> The caveat is don't be adding them later to your DT when you find an
> >> issue and new quirk properties will probably be rejected.
> >
> > Adding them later to your DT when you find an issue makes no sense,
> > as that breaks compatibility with older DTBs.
>
> We won't break compatibility with older DTBs if we use a list of
> compatibles. First the vendor specific one which will use some quirks,
> and if that's not available, have as second the generic jedec,spi-nor to
> fallback to.

Sure, you should use a list.

But the current recommended practice is to not have a list,
but just "jedec,spi-nor" (using a list with a new FLASH part name
causes checkpatch and dtbs_check warnings). Hence if you follow that
recommendation, you will run into compatibility issues with older DTBs
when you discover the quirk later, and decide to add it to the list.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds