[PATCH 2/5] mtd: rawnand: ingenic: use gpiod_set_active_high()

[Paul Cercueil]

Hi,

Le mercredi 13 septembre 2023 à 13:49 +0200, Bartosz Golaszewski a
écrit :
> From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
> 
> Use the new, less cumbersome interface for setting the GPIO as
> active-high that doesn't require first checking the current state.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>

Works for me.

Acked-by: Paul Cercueil <paul at crapouillou.net>

Cheers,
-Paul

> ---
>  drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
> b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
> index 6748226b8bd1..c055133c45fe 100644
> --- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
> +++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
> @@ -388,9 +388,8 @@ static int ingenic_nand_init_chip(struct
> platform_device *pdev,
>          * here for older DTs so we can re-use the generic
> nand_gpio_waitrdy()
>          * helper, and be consistent with what other drivers do.
>          */
> -       if (of_machine_is_compatible("qi,lb60") &&
> -           gpiod_is_active_low(nand->busy_gpio))
> -               gpiod_toggle_active_low(nand->busy_gpio);
> +       if (of_machine_is_compatible("qi,lb60"))
> +               gpiod_set_active_high(nand->busy_gpio);
>  
>         nand->wp_gpio = devm_gpiod_get_optional(dev, "wp",
> GPIOD_OUT_LOW);
>