[PATCH 4/5] platform/x86: int3472/discrete: use gpiod_set_active_low()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>

Use the new polarity setter instead of the more cumbersome toggle
function.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
---
 drivers/platform/x86/intel/int3472/clk_and_regulator.c | 2 +-
 drivers/platform/x86/intel/int3472/led.c               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
index ef4b3141efcd..31e520838b95 100644
--- a/drivers/platform/x86/intel/int3472/clk_and_regulator.c
+++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
@@ -183,7 +183,7 @@ int skl_int3472_register_gpio_clock(struct int3472_discrete_device *int3472,
 	}
 
 	if (polarity == GPIO_ACTIVE_LOW)
-		gpiod_toggle_active_low(int3472->clock.ena_gpio);
+		gpiod_set_active_low(int3472->clock.ena_gpio);
 
 	/* Ensure the pin is in output mode and non-active state */
 	gpiod_direction_output(int3472->clock.ena_gpio, 0);
diff --git a/drivers/platform/x86/intel/int3472/led.c b/drivers/platform/x86/intel/int3472/led.c
index bca1ce7d0d0c..46c9c569df5e 100644
--- a/drivers/platform/x86/intel/int3472/led.c
+++ b/drivers/platform/x86/intel/int3472/led.c
@@ -32,7 +32,7 @@ int skl_int3472_register_pled(struct int3472_discrete_device *int3472,
 				     "getting privacy LED GPIO\n");
 
 	if (polarity == GPIO_ACTIVE_LOW)
-		gpiod_toggle_active_low(int3472->pled.gpio);
+		gpiod_set_active_low(int3472->pled.gpio);
 
 	/* Ensure the pin is in output mode and non-active state */
 	gpiod_direction_output(int3472->pled.gpio, 0);
-- 
2.39.2