[PATCH 2/3] mtd: rawnand: arasan: Ensure program page operations are successful

[Michal Simek]

Hi Miquel,

On 9/11/23 17:52, Miquel Raynal wrote:
> Hi Michal,
> 
> miquel.raynal at bootlin.com wrote on Mon, 17 Jul 2023 21:42:20 +0200:
> 
>> The NAND core complies with the ONFI specification, which itself
>> mentions that after any program or erase operation, a status check
>> should be performed to see whether the operation was finished *and*
>> successful.
>>
>> The NAND core offers helpers to finish a page write (sending the
>> "PAGE PROG" command, waiting for the NAND chip to be ready again, and
>> checking the operation status). But in some cases, advanced controller
>> drivers might want to optimize this and craft their own page write
>> helper to leverage additional hardware capabilities, thus not always
>> using the core facilities.
>>
>> Some drivers, like this one, do not use the core helper to finish a page
>> write because the final cycles are automatically managed by the
>> hardware. In this case, the additional care must be taken to manually
>> perform the final status check.
>>
>> Let's read the NAND chip status at the end of the page write helper and
>> return -EIO upon error.
>>
>> Cc: Michal Simek <michal.simek at amd.com>
>> Cc: stable at vger.kernel.org
>> Fixes: 88ffef1b65cf ("mtd: rawnand: arasan: Support the hardware BCH ECC engine")
>> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
>>
>> ---
>>
>> Hello Michal,
>>
>> I have not tested this, but based on a report on another driver, I
>> believe the status check is also missing here and could sometimes
>> lead to unnoticed partial writes.
>>
>> Please test on your side that everything still works and let me
>> know how it goes.
> 
> Any news from the testing team about patches 2/3 and 3/3?

I asked Amit to test and he didn't get back to me even I asked for it couple of 
times.
Can you please tell me how to test it? I will setup HW myself and test it and 
get back to you.

Thanks,
Michal