[RFC PATCH 2/5] arm64: dts: qcom: ipq9574: Add ecc engine support

[Konrad Dybcio]

On 31.10.2023 13:03, Md Sadre Alam wrote:
> Signed-off-by: Md Sadre Alam <quic_mdalam at quicinc.com>
> Signed-off-by: Sricharan R <quic_srichara at quicinc.com>
> ---
Hello,

you're missing:

- dt-bindings (make dtbs_check is unhappy)
- a commit message
- Co-developed-by for Sricharan


status should read "okay" instead, but in this case it's unnecessary
as you're defining the node and lack of the status property also means
that device is enabled

however

this ECC engine seems to be a part of the NAND controller, so it's
unlikely that the DT maintainers will agree for it to have a separate
node

Konrad
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 5f83ee42a719..b44acb1fac74 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -336,6 +336,11 @@ sdhc_1: mmc at 7804000 {
>  			status = "disabled";
>  		};
>  
> +		bch: qpic_ecc {
> +			compatible = "qcom,ipq9574-ecc";
> +			status = "ok";
> +		}
> +
>  		blsp_dma: dma-controller at 7884000 {
>  			compatible = "qcom,bam-v1.7.0";
>  			reg = <0x07884000 0x2b000>;