[PATCH 3/4] mtd: spinand: winbond: Add rx sample delay for W25N02KV

[Eberhard Stoll]

From: Eberhard Stoll <eberhard.stoll at kontron.de>

Add tCLQV (Clock Low to Output Valid) parameter for Winbond W25N02KV
SPI NAND chip.

Signed-off-by: Eberhard Stoll <eberhard.stoll at kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
 drivers/mtd/nand/spi/winbond.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index f507e3759301..c0b05f5cbf1b 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -168,7 +168,8 @@ static const struct spinand_info winbond_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status),
+		     SPINAND_RX_SAMPLE_DELAY(7)),
 };

 static int winbond_spinand_init(struct spinand_device *spinand)
--
2.25.1