[PATCH V2] mtd: spinand: Add support for XTX XT26xxxDxxxxx
Bruce Suen
bruce_suen at 163.com
Thu Oct 12 03:24:12 PDT 2023
Add Support XTX Technology XT26G01DXXXXX, XT26G11DXXXXX, XT26Q01DXXXXX,
XT26G02DXXXXX, XT26G12DXXXXX, XT26Q02DXXXXX, XT26G04DXXXXX, and
XT26Q04DXXXXX SPI NAND.
These are 3V/1.8V 1G/2G/4Gbit serial SLC NAND flash device with on-die
ECC(8bit strength per 512bytes).
Datasheet Links:
- http://www.xtxtech.com/download/?AId=458
- http://www.xtxtech.com/download/?AId=495
Signed-off-by: Bruce Suen <bruce_suen at 163.com>
---
v1->v2:
- reserve 2 bytes for BBM
- use FIELD_GET() nand macros to get ecc status
---
drivers/mtd/nand/spi/xtx.c | 134 +++++++++++++++++++++++++++++++++++++
1 file changed, 134 insertions(+)
diff --git a/drivers/mtd/nand/spi/xtx.c b/drivers/mtd/nand/spi/xtx.c
index 3911520f7..702dd5ef8 100644
--- a/drivers/mtd/nand/spi/xtx.c
+++ b/drivers/mtd/nand/spi/xtx.c
@@ -4,6 +4,7 @@
* Felix Matouschek <felix at matouschek.org>
*/
+#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/mtd/spinand.h>
@@ -15,6 +16,12 @@
#define XT26G0XA_STATUS_ECC_8_CORRECTED (3 << 4)
#define XT26G0XA_STATUS_ECC_UNCOR_ERROR (2 << 4)
+#define XT26XXXD_STATUS_ECC3_ECC2_MASK GENMASK(7, 6)
+#define XT26XXXD_STATUS_ECC_NO_DETECTED (0)
+#define XT26XXXD_STATUS_ECC_1_7_CORRECTED (1)
+#define XT26XXXD_STATUS_ECC_8_CORRECTED (3)
+#define XT26XXXD_STATUS_ECC_UNCOR_ERROR (2)
+
static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -84,6 +91,53 @@ static int xt26g0xa_ecc_get_status(struct spinand_device *spinand,
return status >> 2;
}
+static int xt26xxxd_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section)
+ return -ERANGE;
+
+ region->offset = mtd->oobsize / 2;
+ region->length = mtd->oobsize / 2;
+
+ return 0;
+}
+
+static int xt26xxxd_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section)
+ return -ERANGE;
+
+ region->offset = 2;
+ region->length = mtd->oobsize / 2 - 2;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops xt26xxxd_ooblayout = {
+ .ecc = xt26xxxd_ooblayout_ecc,
+ .free = xt26xxxd_ooblayout_free,
+};
+
+static int xt26xxxd_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
+{
+ switch (FIELD_GET(STATUS_ECC_MASK, status)) {
+ case XT26XXXD_STATUS_ECC_NO_DETECTED:
+ return 0;
+ case XT26XXXD_STATUS_ECC_UNCOR_ERROR:
+ return -EBADMSG;
+ case XT26XXXD_STATUS_ECC_1_7_CORRECTED:
+ return 4 + FIELD_GET(XT26XXXD_STATUS_ECC3_ECC2_MASK, status);
+ case XT26XXXD_STATUS_ECC_8_CORRECTED:
+ return 8;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
static const struct spinand_info xtx_spinand_table[] = {
SPINAND_INFO("XT26G01A",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE1),
@@ -115,6 +169,86 @@ static const struct spinand_info xtx_spinand_table[] = {
SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&xt26g0xa_ooblayout,
xt26g0xa_ecc_get_status)),
+ SPINAND_INFO("XT26G01D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x31),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26G11D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x34),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26Q01D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x51),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26G02D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x32),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26G12D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x35),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26Q02D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x52),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26G04D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x33),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26Q04D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x53),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
};
static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
--
2.34.1
More information about the linux-mtd
mailing list