[PATCH] mtd: spinand: Add support for XTX XT26xxxDxxxxx

Bruce Suen bruce_suen at 163.com
Sat Oct 7 02:09:54 PDT 2023


Add Support XTX Technology XT26G01DXXXXX, XT26G11DXXXXX, XT26Q01DXXXXX,
XT26G02DXXXXX, XT26G12DXXXXX, XT26Q02DXXXXX, XT26G04DXXXXX, and
XT26Q04DXXXXX SPI NAND.

These are 3V/1.8V 1G/2G/4Gbit serial SLC NAND flash device with on-die
ECC(8bit strength per 512bytes).

Datasheet Links:
- http://www.xtxtech.com/download/?AId=458
- http://www.xtxtech.com/download/?AId=495

Signed-off-by: Bruce Suen <bruce_suen at 163.com>
---
 drivers/mtd/nand/spi/xtx.c | 135 +++++++++++++++++++++++++++++++++++++
 1 file changed, 135 insertions(+)

diff --git a/drivers/mtd/nand/spi/xtx.c b/drivers/mtd/nand/spi/xtx.c
index 3911520f7..ddc69ef76 100644
--- a/drivers/mtd/nand/spi/xtx.c
+++ b/drivers/mtd/nand/spi/xtx.c
@@ -15,6 +15,13 @@
 #define XT26G0XA_STATUS_ECC_8_CORRECTED	(3 << 4)
 #define XT26G0XA_STATUS_ECC_UNCOR_ERROR	(2 << 4)
 
+#define XT26XXXD_STATUS_ECC_MASK	    GENMASK(7, 4)
+#define XT26XXXD_STATUS_ECC_NO_DETECTED     (0 << 4)
+#define XT26XXXD_STATUS_ECC_1_7_CORRECTED   (1 << 4)
+#define XT26XXXD_STATUS_ECC_8_CORRECTED     (3 << 4)
+#define XT26XXXD_STATUS_ECC_UNCOR_ERROR     (2 << 4)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -84,6 +91,54 @@ static int xt26g0xa_ecc_get_status(struct spinand_device *spinand,
 	return status >> 2;
 }
 
+
+static int xt26xxxd_ooblayout_ecc(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = mtd->oobsize / 2;
+	region->length = mtd->oobsize / 2;
+
+	return 0;
+}
+
+static int xt26xxxd_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = 1;
+	region->length = mtd->oobsize / 2 - 1;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops xt26xxxd_ooblayout = {
+	.ecc = xt26xxxd_ooblayout_ecc,
+	.free = xt26xxxd_ooblayout_free,
+};
+
+static int xt26xxxd_ecc_get_status(struct spinand_device *spinand,
+					 u8 status)
+{
+	switch (status & STATUS_ECC_MASK) {
+	case XT26XXXD_STATUS_ECC_NO_DETECTED:
+		return 0;
+	case XT26XXXD_STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+	case XT26XXXD_STATUS_ECC_1_7_CORRECTED:
+		return 4+((status & XT26XXXD_STATUS_ECC_MASK) >> 6);
+	case XT26XXXD_STATUS_ECC_8_CORRECTED:
+		return 8;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
 static const struct spinand_info xtx_spinand_table[] = {
 	SPINAND_INFO("XT26G01A",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE1),
@@ -115,6 +170,86 @@ static const struct spinand_info xtx_spinand_table[] = {
 		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
 				     xt26g0xa_ecc_get_status)),
+	SPINAND_INFO("XT26G01D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x31),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26G11D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x34),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26Q01D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x51),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26G02D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x32),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26G12D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x35),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26Q02D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x52),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26G04D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x33),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26Q04D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x53),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
 };
 
 static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
-- 
2.34.1




More information about the linux-mtd mailing list