[PATCH v2 1/3] dt-bindings: mtd: fixed-partitions: Add binman compatible
Simon Glass
sjg at chromium.org
Thu Oct 5 06:28:15 PDT 2023
Hi Michael,
On Thu, 5 Oct 2023 at 02:54, Michael Walle <mwalle at kernel.org> wrote:
>
> Hi,
>
> >> >> >> Add a compatible string for binman, so we can extend fixed-partitions
> >> >> >> in various ways.
> >> >> >
> >> >> > I've been thinking at the proper way to describe the binman partitions.
> >> >> > I am wondering if we should really extend the fixed-partitions
> >> >> > schema. This description is really basic and kind of supposed to remain
> >> >> > like that. Instead, I wonder if we should not just keep the binman
> >> >> > compatible alone, like many others already. This way it would be very clear
> >> >> > what is expected and allowed in both cases. I am thinking about
> >> >> > something like that:
> >> >> >
> >> >> > Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
> >> >> >
> >> >> > this file is also referenced there (but this patch does the same, which
> >> >> > is what I'd expect):
> >> >> >
> >> >> > Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
> >> >> >
> >> >> > I'll let the binding maintainers judge whether they think it's
> >> >> > relevant, it's not a strong opposition.
> >> >>
> >> >> What is the overall goal here? To replace the current binman node
> >> >> which is
> >> >> usually contained in the -u-boot.dtsi files? If one is using binman to
> >> >> create an image, is it expected that one needs to adapt the DT in
> >> >> linux?
> >> >> Or will it still be a seperate -u-boot.dtsi? > Because in the latter
> >> >> case
> >> >> I see that there will be conflicts because you have to overwrite the
> >> >> flash node. Or will it be a seperate node with all the information
> >> >> duplicated?
> >> >
> >> > The goal is simply to have a full binding for firmware layout, such
> >> > that firmware images can be created, examined and updated. The
> >> > -u-boot.dtsi files are a stopgap while we sort out a real binding.
> >> > They should eventually go away.
> >>
> >> You haven't answered whether this node should be a seperate binman
> >> node - or if you'll reuse the existing flash (partitions) node(s) and
> >> add any missing property there. If it's the latter, I don't think
> >> compatible = "binman", "fixed-partitions"; is correct.
> >
> > My intent is to make it compatible, so wouldn't it make sense to have
> > binman as the first compatible, then falling back to fixed-partitions
> > as the second?
>
> As far as I know, the compatibles should get more specific with each
> string.
That's the opposite to what I understood.
> But "binman" seems to be used as a kind of tag which could be
> added to any compatible under the flash node. What if one wants to build
> an image which isn't compatible = "fixed-partitions"? E.g.
> "linksys,ns-partitions", will it then have
> compatible = "binman", "linksys,ns-partitions"?
I suppose so.
>
>
> >> >> Maybe (a more complete) example would be helpful.
> >> >
> >> > Can you please be a bit more specific? What is missing from the
> >> > example?
> >>
> >> Like a complete (stripped) DTS. Right now I just see how the
> >> individual
> >> node looks like. But with a complete example DTS, my question from
> >> above
> >> would have been answered.
>
> So to give an example myself, please correct it if it's wrong. From
> our board (kontron-sl28):
>
> &fspi {
> status = "okay";
>
> flash at 0 {
> compatible = "jedec,spi-nor";
> m25p,fast-read;
> spi-max-frequency = <133000000>;
> reg = <0>;
> /* The following setting enables 1-1-2 (CMD-ADDR-DATA)
> mode */
> spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
> spi-tx-bus-width = <1>; /* 1 SPI Tx line */
>
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
>
> partition at 0 {
> reg = <0x000000 0x010000>;
> label = "rcw";
> read-only;
> };
>
> partition at 10000 {
> reg = <0x010000 0x1d0000>;
> label = "failsafe bootloader";
> read-only;
> };
>
> partition at 200000 {
> reg = <0x200000 0x010000>;
> label = "configuration store";
> };
>
> partition at 210000 {
> reg = <0x210000 0x1d0000>;
> label = "bootloader";
> };
>
> partition at 3e0000 {
> reg = <0x3e0000 0x020000>;
> label = "bootloader environment";
> };
> };
> };
> };
>
> In u-boot we use binman, see
> arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
> in the u-boot repository.
>
> Now to use the new method, am I expected to adapt the dts in the
> linux kernel? As far as I understand that is the case. So that node
> from above would look something like the following:
>
> &fspi {
> status = "okay";
>
> flash at 0 {
> compatible = "jedec,spi-nor";
> m25p,fast-read;
> spi-max-frequency = <133000000>;
> reg = <0>;
> /* The following setting enables 1-1-2 (CMD-ADDR-DATA)
> mode */
> spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
> spi-tx-bus-width = <1>; /* 1 SPI Tx line */
>
> partitions {
> compatible = "binman", "fixed-partitions";
> #address-cells = <1>;
> #size-cells = <1>;
> [..]
> partition at 210000 {
> reg = <0x210000 0x1d0000>;
> label = "u-boot"; /* or "u-boot+atf" ?
> */
> };
>
> partition at 3e0000 {
> reg = <0x3e0000 0x020000>;
> label = "bootloader environment";
> };
> };
> };
> };
>
> I'm still not sure why that compatible is needed. Also I'd need to
> change
> the label which might break user space apps looking for that specific
> name.
>
> Also, our board might have u-boot/spl or u-boot/spl/bl31/bl32, right now
> that's something which depends on an u-boot configuration variable,
> which
> then enables or disables binman nodes in the -u-boot.dtsi. So in linux
> we only have that "bootloader" partition, but there might be either
> u-boot+spl or u-boot+spl+bl31+bl32.
>
> Honestly, I'm really not sure this should go into a device tree.
I think we might be getting a bit ahead of ourselves here. I thought
that the decision was that the label should indicate the contents. If
you have multiple things in a partition then it would become a
'section' in Binman's terminology. Either the label programmatically
describes what is inside or it doesn't. We can't have it both ways.
What do you suggest?
At present it seems you have the image described in two places - one
is the binman node and the other is the partitions node. I would like
to unify these.
What does user space do with the partition labels?
>
> >> What if a board uses eMMC to store the firmware binaries? Will that
> >> then
> >> be a subnode to the eMMC device?
> >
> > I thought there was a way to link the partition nodes and the device
> > using a property, without having the partition info as a subnode of
> > the device. But I may have imagined it as I cannot find it now. So
> > yes, it will be a subnode of the eMMC device.
>
> Not sure if that will fly.
I can't find it anyway. There is somelike like that in
simple-framebuffer with the 'display' property.
Regards,
SImon
More information about the linux-mtd
mailing list