[PATCH RFC 0/4] Add set_iofv() callback

[Michael Walle]

Hi Biju,

>> > After that I will send a patch using IOFV {3,3,3,3} for both micron
>> > and Adesto flash.
>> 
>> Just to be clear, that will just touch the spi controller as a global
>> default, right?
> 
> Yes, it is in SoC specific bus controller 
> driver(driver/memory/renesas-rpc-if.c)
> 
>> That shouldn't go through spi-nor. Otherwise I'd prefer to use fix (2)
>> from my previous mail.
> 
> Agreed. Fix(2) won't work as renesas-rpc-if probe which sets {3,3,3,3} 
> is called before flash detection.
> and that will make flash detection to fail. So we cannot use fixup. The 
> only way (2) to work
> is to like patch[1].

Ohh I see. Makes sense. Can you ask your SoC engineers, why they
choose the IO3 default to high? I'd guess because it's usually
shared with HOLD# or RESET#. But that really begs the question
why the Atmel flash isn't working with that setting. I suspect
some problems during the turn around of the direction of IO3.
You'd really have to probe with an oscilloscope though.

-michael