[PATCH 6/6] mtd: rawnand: gpio: Rename file

[Linus Walleij]

The implementation of the GPIO NAND controller is just "gpio"
with the usecase for NAND implied from the folder nand/raw.

This is not so great when the module gets the name "gpio.ko".
Rename the implementation to nand-gpio.c so the module is
named nand-gpio.ko which is more reasonable.

We put "nand" first instead of "gpio" because the order is
usually <subsystem>-<driver>.c, cf ls drivers/gpio/

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 drivers/mtd/nand/raw/Makefile                | 2 +-
 drivers/mtd/nand/raw/{gpio.c => nand-gpio.c} | 0
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 25120a4afada..f0e377332812 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel/
-obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
+obj-$(CONFIG_MTD_NAND_GPIO)		+= nand-gpio.o
 omap2_nand-objs := omap2.o
 obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o
 obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/nand-gpio.c
similarity index 100%
rename from drivers/mtd/nand/raw/gpio.c
rename to drivers/mtd/nand/raw/nand-gpio.c

-- 
2.34.1