[PATCH 4/6] mtd: rawnand: gpio: Use device properties

Linus Walleij linus.walleij at linaro.org
Wed Nov 8 06:33:52 PST 2023


The platform data (struct gpio_nand_platdata) isn't really used
in any boardfile in the kernel: the only probe path is from
device tree.

Convert the driver to not use the platform data header at all
and read out the device tree properties using device
properties so we don't need to have the driver be exclusively
device tree either: ACPI or software nodes work fine if
need be. Drop the ifdeffery around CONFIG_OF as a consequence.

The code reads "bank-width" to plat->options flags and passes
it directly to the NAND chip struct, so just assign this
directly to the chip instead.

The code reads one property "chip-delay" that it stores
in pdata->delay and never use, so drop this altogether.
If timings should be supported this can probably be done in
a more detailed way using the new elaborate timings structs
that exist for NAND.

The platform data contains a callback to augment partitions,
but since there are no board files using this platform
data to define a gpio NAND device, this is never used so
the code handling it can be deleted.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 drivers/mtd/nand/raw/gpio.c | 72 ++++++++-------------------------------------
 1 file changed, 12 insertions(+), 60 deletions(-)

diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c
index df6facf0ec9a..5553101c709c 100644
--- a/drivers/mtd/nand/raw/gpio.c
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -22,9 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/mtd/nand-gpio.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
+#include <linux/property.h>
 #include <linux/delay.h>
 
 struct gpiomtd {
@@ -32,7 +30,6 @@ struct gpiomtd {
 	void __iomem		*io;
 	void __iomem		*io_sync;
 	struct nand_chip	nand_chip;
-	struct gpio_nand_platdata plat;
 	struct gpio_desc *ce; /* Optional chip enable */
 	struct gpio_desc *cle;
 	struct gpio_desc *ale;
@@ -175,46 +172,38 @@ static const struct nand_controller_ops gpio_nand_ops = {
 	.attach_chip = gpio_nand_attach_chip,
 };
 
-#ifdef CONFIG_OF
 static const struct of_device_id gpio_nand_id_table[] = {
 	{ .compatible = "gpio-control-nand" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, gpio_nand_id_table);
 
-static int gpio_nand_get_config_of(const struct device *dev,
-				   struct gpio_nand_platdata *plat)
+static int gpio_nand_get_config(struct device *dev,
+				struct nand_chip *chip)
 {
 	u32 val;
 
-	if (!dev->of_node)
-		return -ENODEV;
-
-	if (!of_property_read_u32(dev->of_node, "bank-width", &val)) {
+	if (!device_property_read_u32(dev, "bank-width", &val)) {
 		if (val == 2) {
-			plat->options |= NAND_BUSWIDTH_16;
+			chip->options |= NAND_BUSWIDTH_16;
 		} else if (val != 1) {
 			dev_err(dev, "invalid bank-width %u\n", val);
 			return -EINVAL;
 		}
 	}
 
-	if (!of_property_read_u32(dev->of_node, "chip-delay", &val))
-		plat->chip_delay = val;
-
 	return 0;
 }
 
-static struct resource *gpio_nand_get_io_sync_of(struct platform_device *pdev)
+static struct resource *gpio_nand_get_io_sync_prop(struct device *dev)
 {
 	struct resource *r;
 	u64 addr;
 
-	if (of_property_read_u64(pdev->dev.of_node,
-				       "gpio-control-nand,io-sync-reg", &addr))
+	if (device_property_read_u64(dev, "gpio-control-nand,io-sync-reg", &addr))
 		return NULL;
 
-	r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL);
+	r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
 	if (!r)
 		return NULL;
 
@@ -224,40 +213,11 @@ static struct resource *gpio_nand_get_io_sync_of(struct platform_device *pdev)
 
 	return r;
 }
-#else /* CONFIG_OF */
-static inline int gpio_nand_get_config_of(const struct device *dev,
-					  struct gpio_nand_platdata *plat)
-{
-	return -ENOSYS;
-}
-
-static inline struct resource *
-gpio_nand_get_io_sync_of(struct platform_device *pdev)
-{
-	return NULL;
-}
-#endif /* CONFIG_OF */
-
-static inline int gpio_nand_get_config(const struct device *dev,
-				       struct gpio_nand_platdata *plat)
-{
-	int ret = gpio_nand_get_config_of(dev, plat);
-
-	if (!ret)
-		return ret;
-
-	if (dev_get_platdata(dev)) {
-		memcpy(plat, dev_get_platdata(dev), sizeof(*plat));
-		return 0;
-	}
-
-	return -EINVAL;
-}
 
 static inline struct resource *
 gpio_nand_get_io_sync(struct platform_device *pdev)
 {
-	struct resource *r = gpio_nand_get_io_sync_of(pdev);
+	struct resource *r = gpio_nand_get_io_sync_prop(&pdev->dev);
 
 	if (r)
 		return r;
@@ -291,9 +251,6 @@ static int gpio_nand_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	int ret = 0;
 
-	if (!dev->of_node && !dev_get_platdata(dev))
-		return -EINVAL;
-
 	gpiomtd = devm_kzalloc(dev, sizeof(*gpiomtd), GFP_KERNEL);
 	if (!gpiomtd)
 		return -ENOMEM;
@@ -311,7 +268,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
 			return PTR_ERR(gpiomtd->io_sync);
 	}
 
-	ret = gpio_nand_get_config(dev, &gpiomtd->plat);
+	ret = gpio_nand_get_config(dev, chip);
 	if (ret)
 		return ret;
 
@@ -349,7 +306,6 @@ static int gpio_nand_probe(struct platform_device *pdev)
 	gpiomtd->base.ops = &gpio_nand_ops;
 
 	nand_set_flash_node(chip, pdev->dev.of_node);
-	chip->options		= gpiomtd->plat.options;
 	chip->controller	= &gpiomtd->base;
 
 	mtd			= nand_to_mtd(chip);
@@ -372,11 +328,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_wp;
 
-	if (gpiomtd->plat.adjust_parts)
-		gpiomtd->plat.adjust_parts(&gpiomtd->plat, mtd->size);
-
-	ret = mtd_device_register(mtd, gpiomtd->plat.parts,
-				  gpiomtd->plat.num_parts);
+	ret = mtd_device_register(mtd, NULL, 0);
 	if (!ret)
 		return 0;
 
@@ -395,7 +347,7 @@ static struct platform_driver gpio_nand_driver = {
 	.remove_new	= gpio_nand_remove,
 	.driver		= {
 		.name	= "gpio-nand",
-		.of_match_table = of_match_ptr(gpio_nand_id_table),
+		.of_match_table = gpio_nand_id_table,
 	},
 };
 

-- 
2.34.1




More information about the linux-mtd mailing list