[RFC PATCH 1/5] mtd: nand: ecc-qcom: Add support for ECC Engine Driver

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Fri Nov 3 06:54:15 PDT 2023


On Fri, 3 Nov 2023 at 15:24, Md Sadre Alam <quic_mdalam at quicinc.com> wrote:
>
>
>
> On 11/3/2023 6:03 PM, Dmitry Baryshkov wrote:
> > On Fri, 3 Nov 2023 at 14:25, Md Sadre Alam <quic_mdalam at quicinc.com> wrote:
> >>
> >>
> >>
> >> On 10/31/2023 10:41 PM, Krzysztof Kozlowski wrote:
> >>> On 31/10/2023 13:03, Md Sadre Alam wrote:
> >>>
> >>> Eh? Empty?
> >>
> >> QPIC controller has the ecc pipelined so will keep the ecc support
> >> inlined in both raw nand and serial nand driver.
> >>
> >> Droping this driver since device node was NAK-ed
> >> https://www.spinics.net/lists/linux-arm-msm/msg177596.html
> >
> > It seems, we have to repeat the same thing again and again:
> >
> > It was not the device node that was NAKed. It was the patch that was
> > NAKed. Please read the emails carefully.
> >
> > And next time please perform dtbs_check, dt_binding_check and
> > checkpatch before sending the patch.
> >
> > It is perfectly fine to ask questions 'like we are getting we are
> > getting this and that issues with the bindings, please advise'. It is
> > not fine to skip that step completely.
>
> Sorry in V1 will run all basic checks.
>
> Based on below feedback [1] and NAK on the device node patch
> got idea of having separate device node for ECC is not acceptable.
> Could you please help to clarify that.
>
> Since ECC block is inlined with QPIC controller so is the below
> device node acceptable ?

No, the node below is not acceptable. And you have already got two
reasons for that. Let me repeat them for you:

- it is "okay" not "ok"
- no underscores in node names.

If you want to have a more meaningful discussion, please provide full
ECC + NAND + SPI DT bindings, only then we can discuss them.

>     bch: qpic_ecc {
>                            compatible = "qcom,ipq9574-ecc";
>                            status = "ok";
>                    };
>
>   [1] https://www.spinics.net/lists/linux-arm-msm/msg177525.html
>
> >
> >>>
> >>>> Signed-off-by: Md Sadre Alam <quic_mdalam at quicinc.com>
> >>>> Signed-off-by: Sricharan R <quic_srichara at quicinc.com>
> >>>> ---
> >>>>    drivers/mtd/nand/Kconfig    |   7 ++
> >>>>    drivers/mtd/nand/Makefile   |   1 +
> >>>>    drivers/mtd/nand/ecc-qcom.c | 198 ++++++++++++++++++++++++++++++++++++
> >>>>    3 files changed, 206 insertions(+)
> >>>>    create mode 100644 drivers/mtd/nand/ecc-qcom.c
> >>>>
> >>>
> >>> ...
> >>>
> >>>> +
> >>>> +    return 0;
> >>>> +}
> >>>> +EXPORT_SYMBOL(qcom_ecc_config);
> >>>> +
> >>>> +void qcom_ecc_enable(struct qcom_ecc *ecc)
> >>>> +{
> >>>> +    ecc->use_ecc = true;
> >>>> +}
> >>>> +EXPORT_SYMBOL(qcom_ecc_enable);
> >>>
> >>> Drop this and all other exports. Nothing here explains the need for them.
> >>>
> >>>> +
> >>>> +void qcom_ecc_disable(struct qcom_ecc *ecc)
> >>>> +{
> >>>> +    ecc->use_ecc = false;
> >>>> +}
> >>>> +EXPORT_SYMBOL(qcom_ecc_disable);
> >>>> +
> >>>> +static const struct of_device_id qpic_ecc_dt_match[] = {
> >>>> +    {
> >>>> +            .compatible = "qcom,ipq9574-ecc",
> >>>
> >>> Please run scripts/checkpatch.pl and fix reported warnings. Some
> >>> warnings can be ignored, but the code here looks like it needs a fix.
> >>> Feel free to get in touch if the warning is not clear.
> >>>
> >>> Checkpatch is preerquisite. Don't send patches which have obvious issues
> >>> pointed out by checkpatch. It's a waste of reviewers time.
> >>>
> >>>> +    },
> >>>> +    {},
> >>>> +};
> >>>> +
> >>>> +static int qpic_ecc_probe(struct platform_device *pdev)
> >>>> +{
> >>>> +    struct device *dev = &pdev->dev;
> >>>> +    struct qpic_ecc *ecc;
> >>>> +    u32 max_eccdata_size;
> >>>> +
> >>>> +    ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
> >>>> +    if (!ecc)
> >>>> +            return -ENOMEM;
> >>>> +
> >>>> +    ecc->caps = of_device_get_match_data(dev);
> >>>> +
> >>>> +    ecc->dev = dev;
> >>>> +    platform_set_drvdata(pdev, ecc);
> >>>> +    dev_info(dev, "probed\n");
> >>>
> >>> No, no such messages.
> >>>
> >>>
> >>>
> >>> Best regards,
> >>> Krzysztof
> >>>
> >
> >
> >



-- 
With best wishes
Dmitry



More information about the linux-mtd mailing list