[PATCH v4 1/5] ubi: Use the fault injection framework to enhance the fault injection capability

[Zhihao Cheng]

在 2023/11/3 14:55, ZhaoLong Wang 写道:
> To make debug parameters configurable at run time, use the
> fault injection framework to reconstruct the debugfs interface,
> and retain the legacy fault injection interface.
>
> Now, the file emulate_failures and fault_attr files control whether
> to enable fault emmulation.
>
> The file emulate_failures receives a mask that controls type and
> process of fault injection. Generally, for ease of use, you can
> directly enter a mask with all 1s.
>
> echo 0xffff > /sys/kernel/debug/ubi/ubi0/emulate_failures
>
> And you need to configure other fault-injection capabilities for
> testing purpose:
>
> echo 100 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/probability
> echo 15 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/space
> echo 2 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/verbose
> echo -1 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/times
>
> The CONFIG_MTD_UBI_FAULT_INJECTION to enable the Fault Injection is
> added to kconfig.
>
> Signed-off-by: ZhaoLong Wang <wangzhaolong1 at huawei.com>
> ---
>   drivers/mtd/ubi/Kconfig |   9 +++
>   drivers/mtd/ubi/debug.c |  68 +++++++++++++++++--
>   drivers/mtd/ubi/debug.h | 142 +++++++++++++++++++++++++++++++++-------
>   drivers/mtd/ubi/io.c    |  10 ++-
>   drivers/mtd/ubi/ubi.h   |  15 ++---
>   5 files changed, 202 insertions(+), 42 deletions(-)
>
>
Reviewed-by: Zhihao Cheng <chengzhihao1 at huawei.com>