[RESEND PATCH v3] mtd: rawnand: macronix: OTP access for MX30LFxG18AC

Arseniy Krasnov avkrasnov at sberdevices.ru
Mon May 15 02:49:50 PDT 2023


Hello @Miquel!

Sorry, but who could review this patch? :) IIUC this logic is very hw specific and we need
someone who knows it well? I tested this patch on our devices (with already known Meson NAND
controller).

Thanks, Arseniy

On 11.05.2023 21:21, Arseniy Krasnov wrote:
> Cc: Mason Yang <masonccyang at mxic.com.tw> and Boris Brezillon <boris.brezillon at collabora.com>
> 
> On 11.05.2023 18:21, Arseniy Krasnov wrote:
>> This adds support for OTP area access on MX30LFxG18AC chip series.
>>
>> Changelog:
>>   v1 -> v2:
>>   * Add slab.h include due to kernel test robot error.
>>   v2 -> v3:
>>   * Use 'uint64_t' as input argument for 'do_div()' instead
>>     of 'unsigned long' due to kernel test robot error.
>>
>> Signed-off-by: Arseniy Krasnov <AVKrasnov at sberdevices.ru>
>> ---
>>  drivers/mtd/nand/raw/nand_macronix.c | 213 +++++++++++++++++++++++++++
>>  1 file changed, 213 insertions(+)
>>
>> diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
>> index 1472f925f386..2301f990678e 100644
>> --- a/drivers/mtd/nand/raw/nand_macronix.c
>> +++ b/drivers/mtd/nand/raw/nand_macronix.c
>> @@ -6,6 +6,7 @@
>>   * Author: Boris Brezillon <boris.brezillon at free-electrons.com>
>>   */
>>  
>> +#include <linux/slab.h>
>>  #include "linux/delay.h"
>>  #include "internals.h"
>>  
>> @@ -31,6 +32,20 @@
>>  
>>  #define MXIC_CMD_POWER_DOWN 0xB9
>>  
>> +#define ONFI_FEATURE_ADDR_30LFXG18AC_OTP	0x90
>> +#define MACRONIX_30LFXG18AC_OTP_START_PAGE	0
>> +#define MACRONIX_30LFXG18AC_OTP_PAGES		30
>> +#define MACRONIX_30LFXG18AC_OTP_PAGE_SIZE	2112
>> +#define MACRONIX_30LFXG18AC_OTP_START_BYTE	\
>> +	(MACRONIX_30LFXG18AC_OTP_START_PAGE *	\
>> +	 MACRONIX_30LFXG18AC_OTP_PAGE_SIZE)
>> +#define MACRONIX_30LFXG18AC_OTP_SIZE_BYTES	\
>> +	(MACRONIX_30LFXG18AC_OTP_PAGES *	\
>> +	 MACRONIX_30LFXG18AC_OTP_PAGE_SIZE)
>> +
>> +#define MACRONIX_30LFXG18AC_OTP_EN		BIT(0)
>> +#define MACRONIX_30LFXG18AC_OTP_LOCKED		BIT(1)
>> +
>>  struct nand_onfi_vendor_macronix {
>>  	u8 reserved;
>>  	u8 reliability_func;
>> @@ -316,6 +331,203 @@ static void macronix_nand_deep_power_down_support(struct nand_chip *chip)
>>  	chip->ops.resume = mxic_nand_resume;
>>  }
>>  
>> +static int macronix_30lfxg18ac_get_otp_info(struct mtd_info *mtd, size_t len,
>> +					    size_t *retlen,
>> +					    struct otp_info *buf)
>> +{
>> +	if (len < sizeof(*buf))
>> +		return -EINVAL;
>> +
>> +	/* Don't know how to check that OTP is locked. */
>> +	buf->locked = 0;
>> +	buf->start = MACRONIX_30LFXG18AC_OTP_START_BYTE;
>> +	buf->length = MACRONIX_30LFXG18AC_OTP_SIZE_BYTES;
>> +
>> +	*retlen = sizeof(*buf);
>> +
>> +	return 0;
>> +}
>> +
>> +static int macronix_30lfxg18ac_otp_enable(struct nand_chip *nand)
>> +{
>> +	uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 };
>> +
>> +	feature_buf[0] = MACRONIX_30LFXG18AC_OTP_EN;
>> +	return nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP,
>> +				 feature_buf);
>> +}
>> +
>> +static int macronix_30lfxg18ac_otp_disable(struct nand_chip *nand)
>> +{
>> +	uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 };
>> +
>> +	return nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP,
>> +				 feature_buf);
>> +}
>> +
>> +static int __macronix_30lfxg18ac_rw_otp(struct mtd_info *mtd,
>> +					loff_t offs_in_flash,
>> +					size_t len, size_t *retlen,
>> +					u_char *buf, bool write)
>> +{
>> +	struct nand_chip *nand;
>> +	size_t bytes_handled;
>> +	off_t offs_in_page;
>> +	uint64_t page;
>> +	void *dma_buf;
>> +	int ret;
>> +
>> +	/* 'nand_prog/read_page_op()' may use 'buf' as DMA buffer,
>> +	 * so allocate properly aligned memory for it. This is
>> +	 * needed because cross page accesses may lead to unaligned
>> +	 * buffer address for DMA.
>> +	 */
>> +	dma_buf = kmalloc(MACRONIX_30LFXG18AC_OTP_PAGE_SIZE, GFP_KERNEL);
>> +	if (!dma_buf)
>> +		return -ENOMEM;
>> +
>> +	nand = mtd_to_nand(mtd);
>> +	nand_select_target(nand, 0);
>> +
>> +	ret = macronix_30lfxg18ac_otp_enable(nand);
>> +	if (ret)
>> +		goto out_otp;
>> +
>> +	page = offs_in_flash;
>> +	/* 'page' will be result of division. */
>> +	offs_in_page = do_div(page, MACRONIX_30LFXG18AC_OTP_PAGE_SIZE);
>> +	bytes_handled = 0;
>> +
>> +	while (bytes_handled < len &&
>> +	       page < MACRONIX_30LFXG18AC_OTP_PAGES) {
>> +		size_t bytes_to_handle;
>> +
>> +		bytes_to_handle = min_t(size_t, len - bytes_handled,
>> +					MACRONIX_30LFXG18AC_OTP_PAGE_SIZE -
>> +					offs_in_page);
>> +
>> +		if (write) {
>> +			memcpy(dma_buf, &buf[bytes_handled], bytes_to_handle);
>> +			ret = nand_prog_page_op(nand, page, offs_in_page,
>> +						dma_buf, bytes_to_handle);
>> +		} else {
>> +			ret = nand_read_page_op(nand, page, offs_in_page,
>> +						dma_buf, bytes_to_handle);
>> +			if (!ret)
>> +				memcpy(&buf[bytes_handled], dma_buf,
>> +				       bytes_to_handle);
>> +		}
>> +		if (ret)
>> +			goto out_otp;
>> +
>> +		bytes_handled += bytes_to_handle;
>> +		offs_in_page = 0;
>> +		page++;
>> +	}
>> +
>> +	*retlen = bytes_handled;
>> +
>> +out_otp:
>> +	if (ret)
>> +		dev_err(&mtd->dev, "failed to perform OTP IO: %i\n", ret);
>> +
>> +	ret = macronix_30lfxg18ac_otp_disable(nand);
>> +	WARN(ret, "failed to leave OTP mode after %s\n",
>> +	     write ? "write" : "read");
>> +	nand_deselect_target(nand);
>> +	kfree(dma_buf);
>> +
>> +	return ret;
>> +}
>> +
>> +static int macronix_30lfxg18ac_write_otp(struct mtd_info *mtd, loff_t to,
>> +					 size_t len, size_t *rlen,
>> +					 const u_char *buf)
>> +{
>> +	return __macronix_30lfxg18ac_rw_otp(mtd, to, len, rlen, (u_char *)buf,
>> +					    true);
>> +}
>> +
>> +static int macronix_30lfxg18ac_read_otp(struct mtd_info *mtd, loff_t from,
>> +					size_t len, size_t *rlen,
>> +					u_char *buf)
>> +{
>> +	return __macronix_30lfxg18ac_rw_otp(mtd, from, len, rlen, buf, false);
>> +}
>> +
>> +static int macronix_30lfxg18ac_lock_otp(struct mtd_info *mtd, loff_t from,
>> +					size_t len)
>> +{
>> +	uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 };
>> +	struct nand_chip *nand;
>> +	int ret;
>> +
>> +	if (from != MACRONIX_30LFXG18AC_OTP_START_BYTE ||
>> +	    len != MACRONIX_30LFXG18AC_OTP_SIZE_BYTES)
>> +		return -EINVAL;
>> +
>> +	dev_dbg(&mtd->dev, "locking OTP\n");
>> +
>> +	nand = mtd_to_nand(mtd);
>> +	nand_select_target(nand, 0);
>> +
>> +	feature_buf[0] = MACRONIX_30LFXG18AC_OTP_EN |
>> +			 MACRONIX_30LFXG18AC_OTP_LOCKED;
>> +	ret = nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP,
>> +				feature_buf);
>> +	if (ret) {
>> +		dev_err(&mtd->dev,
>> +			"failed to lock OTP (set features): %i\n", ret);
>> +		nand_deselect_target(nand);
>> +		return ret;
>> +	}
>> +
>> +	/* Do dummy page prog with zero address. */
>> +	feature_buf[0] = 0;
>> +	ret = nand_prog_page_op(nand, 0, 0, feature_buf, 1);
>> +	if (ret)
>> +		dev_err(&mtd->dev,
>> +			"failed to lock OTP (page prog): %i\n", ret);
>> +
>> +	ret = macronix_30lfxg18ac_otp_disable(nand);
>> +	WARN(ret, "failed to leave OTP mode after lock\n");
>> +
>> +	nand_deselect_target(nand);
>> +
>> +	return ret;
>> +}
>> +
>> +static void macronix_nand_setup_otp(struct nand_chip *chip)
>> +{
>> +	static const char * const supported_otp_models[] = {
>> +		"MX30LF1G18AC",
>> +		"MX30LF2G18AC",
>> +		"MX30LF4G18AC",
>> +	};
>> +	struct mtd_info *mtd;
>> +
>> +	if (!chip->parameters.supports_set_get_features)
>> +		return;
>> +
>> +	if (match_string(supported_otp_models,
>> +			 ARRAY_SIZE(supported_otp_models),
>> +			 chip->parameters.model) < 0)
>> +		return;
>> +
>> +	bitmap_set(chip->parameters.get_feature_list,
>> +		   ONFI_FEATURE_ADDR_30LFXG18AC_OTP, 1);
>> +	bitmap_set(chip->parameters.set_feature_list,
>> +		   ONFI_FEATURE_ADDR_30LFXG18AC_OTP, 1);
>> +
>> +	mtd = nand_to_mtd(chip);
>> +	mtd->_get_fact_prot_info = macronix_30lfxg18ac_get_otp_info;
>> +	mtd->_read_fact_prot_reg = macronix_30lfxg18ac_read_otp;
>> +	mtd->_get_user_prot_info = macronix_30lfxg18ac_get_otp_info;
>> +	mtd->_read_user_prot_reg = macronix_30lfxg18ac_read_otp;
>> +	mtd->_write_user_prot_reg = macronix_30lfxg18ac_write_otp;
>> +	mtd->_lock_user_prot_reg = macronix_30lfxg18ac_lock_otp;
>> +}
>> +
>>  static int macronix_nand_init(struct nand_chip *chip)
>>  {
>>  	if (nand_is_slc(chip))
>> @@ -325,6 +537,7 @@ static int macronix_nand_init(struct nand_chip *chip)
>>  	macronix_nand_onfi_init(chip);
>>  	macronix_nand_block_protection_support(chip);
>>  	macronix_nand_deep_power_down_support(chip);
>> +	macronix_nand_setup_otp(chip);
>>  
>>  	return 0;
>>  }



More information about the linux-mtd mailing list