[PATCH v5 1/8] mtd: spi-nor: Introduce the concept of bank

Miquel Raynal miquel.raynal at bootlin.com
Tue Mar 28 08:40:58 PDT 2023


SPI NOR chips are made of pages, which gathered in small groups make
(erase) sectors. Sectors, gathered together, make banks inside the
chip. Until now, there was only one bank per device supported, but we
are about to introduce support for new chips featuring several banks (up
to 4 so far) where different operations may happen in parallel.

Let's allow describing these additional bank parameters, and let's do
this independently of any other value (like the number of sectors) with
an absolute value.

By default we consider that all chips have a single bank.

Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush at kernel.org>
---
 drivers/mtd/spi-nor/core.c   |  1 +
 drivers/mtd/spi-nor/core.h   | 16 +++++++++++-----
 drivers/mtd/spi-nor/xilinx.c |  1 +
 3 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 0a78045ca1d9..7d9ca799f767 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2583,6 +2583,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
 	/* Set SPI NOR sizes. */
 	params->writesize = 1;
 	params->size = (u64)info->sector_size * info->n_sectors;
+	params->bank_size = div64_u64(params->size, info->n_banks);
 	params->page_size = info->page_size;
 
 	if (!(info->flags & SPI_NOR_NO_FR)) {
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 25423225c29d..db0e458810c7 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -336,7 +336,8 @@ struct spi_nor_otp {
  * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
  * Serial Flash Discoverable Parameters (SFDP) tables.
  *
- * @size:		the flash memory density in bytes.
+ * @bank_size:		the flash memory bank density in bytes.
+ * @size:		the total flash memory density in bytes.
  * @writesize		Minimal writable flash unit size. Defaults to 1. Set to
  *			ECC unit size for ECC-ed flashes.
  * @page_size:		the page size of the SPI NOR flash memory.
@@ -374,6 +375,7 @@ struct spi_nor_otp {
  * @locking_ops:	SPI NOR locking methods.
  */
 struct spi_nor_flash_parameter {
+	u64				bank_size;
 	u64				size;
 	u32				writesize;
 	u32				page_size;
@@ -435,6 +437,7 @@ struct spi_nor_fixups {
  * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
  *                  isn't necessarily called a "sector" by the vendor.
  * @n_sectors:      the number of sectors.
+ * @n_banks:        the number of banks.
  * @page_size:      the flash's page size.
  * @addr_nbytes:    number of address bytes to send.
  *
@@ -495,6 +498,7 @@ struct flash_info {
 	unsigned sector_size;
 	u16 n_sectors;
 	u16 page_size;
+	u8 n_banks;
 	u8 addr_nbytes;
 
 	bool parse_sfdp;
@@ -540,24 +544,26 @@ struct flash_info {
 	.id = { SPI_NOR_ID_3ITEMS(_jedec_id), SPI_NOR_ID_3ITEMS(_ext_id) }, \
 	.id_len = 6
 
-#define SPI_NOR_GEOMETRY(_sector_size, _n_sectors)			\
+#define SPI_NOR_GEOMETRY(_sector_size, _n_sectors, _n_banks)		\
 	.sector_size = (_sector_size),					\
 	.n_sectors = (_n_sectors),					\
-	.page_size = 256
+	.page_size = 256,						\
+	.n_banks = (_n_banks)
 
 /* Used when the "_ext_id" is two bytes at most */
 #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
 	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors)),
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
 
 #define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
 	SPI_NOR_ID6((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors)),
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
 
 #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
 		.sector_size = (_sector_size),				\
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
+		.n_banks = 1,						\
 		.addr_nbytes = (_addr_nbytes),				\
 		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
 
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 5723157739fc..7175de8aa336 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -31,6 +31,7 @@
 		.sector_size = (8 * (_page_size)),			\
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
+		.n_banks = 1,						\
 		.addr_nbytes = 3,					\
 		.flags = SPI_NOR_NO_FR
 
-- 
2.34.1




More information about the linux-mtd mailing list