[PATCH v4 01/11] mtd: spi-nor: core: Move generic method to core - micron_st_nor_set_4byte_addr_mode

Tudor Ambarus tudor.ambarus at linaro.org
Tue Mar 21 23:40:23 PDT 2023


This method is described in JESD216 BFPT[SFDP_DWORD(16)], BIT(30) and
BIT(22). Move the method to core.

Signed-off-by: Tudor Ambarus <tudor.ambarus at linaro.org>
---
 drivers/mtd/spi-nor/core.c      | 24 ++++++++++++++++++++++++
 drivers/mtd/spi-nor/core.h      |  1 +
 drivers/mtd/spi-nor/micron-st.c | 24 ------------------------
 3 files changed, 25 insertions(+), 24 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 0a78045ca1d9..8d246b1b439a 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -538,6 +538,30 @@ int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
 	return ret;
 }
 
+/**
+ * micron_st_nor_set_4byte_addr_mode() - Set 4-byte address mode for ST and
+ * Micron flashes.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
+ *		address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int micron_st_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_set_4byte_addr_mode(nor, enable);
+	if (ret)
+		return ret;
+
+	return spi_nor_write_disable(nor);
+}
+
 /**
  * spansion_set_4byte_addr_mode() - Set 4-byte address mode for Spansion
  * flashes.
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 25423225c29d..aa44474c042a 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -635,6 +635,7 @@ void spi_nor_spimem_setup_op(const struct spi_nor *nor,
 int spi_nor_write_enable(struct spi_nor *nor);
 int spi_nor_write_disable(struct spi_nor *nor);
 int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
+int micron_st_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
 int spi_nor_wait_till_ready(struct spi_nor *nor);
 int spi_nor_global_block_unlock(struct spi_nor *nor);
 int spi_nor_lock_and_prep(struct spi_nor *nor);
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 7bb86df52f0b..3bbf65234ebd 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -301,30 +301,6 @@ static const struct flash_info st_nor_parts[] = {
 	{ "m25px80",    INFO(0x207114,  0, 64 * 1024, 16) },
 };
 
-/**
- * micron_st_nor_set_4byte_addr_mode() - Set 4-byte address mode for ST and
- * Micron flashes.
- * @nor:	pointer to 'struct spi_nor'.
- * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
- *		address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int micron_st_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
-{
-	int ret;
-
-	ret = spi_nor_write_enable(nor);
-	if (ret)
-		return ret;
-
-	ret = spi_nor_set_4byte_addr_mode(nor, enable);
-	if (ret)
-		return ret;
-
-	return spi_nor_write_disable(nor);
-}
-
 /**
  * micron_st_nor_read_fsr() - Read the Flag Status Register.
  * @nor:	pointer to 'struct spi_nor'
-- 
2.40.0.rc1.284.g88254d51c5-goog




More information about the linux-mtd mailing list