[PATCH v2 0/2] mtd: spi-nor: Avoid setting SRWD bit in SR

[Amit Kumar Mahapatra]

Setting the status register write disable (SRWD) bit in the status
register (SR) with WP signal of the flash not connected will configure the
SR permanently as read-only. To avoid this a boolean type DT property
"broken-wp" is introduced. If this property is defined, the spi-nor doesn't
set the SRWD bit in SR while performing flash protection operation.
---
BRANCH: for-next

Changes in v2:
- Modified DT property description to add information about a
  valid use case.
- Added Reviewed-by tag in 1/2.
- Updated comment description in 2/2.    
---
Amit Kumar Mahapatra (2):
  dt-bindings: mtd: jedec, spi-nor: Add DT property to avoid setting
    SRWD bit in status register
  mtd: spi-nor: Avoid setting SRWD bit in SR if WP signal not connected

 .../devicetree/bindings/mtd/jedec,spi-nor.yaml    | 15 +++++++++++++++
 drivers/mtd/spi-nor/core.c                        |  3 +++
 drivers/mtd/spi-nor/core.h                        |  1 +
 drivers/mtd/spi-nor/swp.c                         |  9 +++++++--
 4 files changed, 26 insertions(+), 2 deletions(-)

-- 
2.17.1