[PATCH 2/2] mtd: spi-nor: Add support for sst26vf032b flash

[Michael Walle]

Hi,

Am 2023-06-09 16:43, schrieb Miquel Raynal:
> Describe this new part. I simply copy/pasted the entry for its cousins
> with twice more/less storage capacity. The datasheet is public:
> https://ww1.microchip.com/downloads/aemDocuments/documents/MPD/ProductDocuments/DataSheets/SST26VF032B-SST26VF032BA-2.5V-3.0V-32-Mbit-Serial-Quad-IO-%28SQI%29-Flash-Memory-20005218K.pdf

As Link: tag please

> Without the NO_SFDP_FLAGs only partial erasures happen so I believe the
> 4K sector flag is needed. I cannot test dual/quad reads, so I kept 
> these
> to mimic the other entries, just in case.

I'd prefer to have proper SFDP parsing, even if you cannot confirm that
dual/quad reads are working. That could always be a fixup later.

> Here are the sfdp tables plus base testing to show it works.
> 
> $ cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
> sst26vf032b
> $ cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
> bf2642
> $ cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
> sst
> $ xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 53464450060102ff00060110300000ff81000106000100ffbf0001180002
> 0001fffffffffffffffffffffffffffffffffd20f1ffffffff0144eb086b
> 083b80bbfeffffffffff00ffffff440b0c200dd80fd810d820914824806f
> 1d81ed0f773830b030b0f7ffffff29c25cfff030c080ffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffff0004fff37f0000f57f0000f9ff
> 3d00f57f0000f37f0000ffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffbf2642ffb95ffdff30f260f332ff0a122346ff0f19320f1919ffffff
> ffffffff00669938ff05013506040232b03072428de89888a585c09faf5a
> ffff06ec060c0003080bffffffffff07ffff0202ff060300fdfd040600fc
> 0300fefe0202070e
> $ md5sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> e7efddddb3d5ee89ca37bf6b6e789645  
> /sys/bus/spi/devices/spi0.0/spi-nor/sfdp

Thanks!

> $ dd if=/dev/urandom of=./qspi_test bs=1M count=1
> 1+0 records in
> 1+0 records out
> $ mtd_debug write /dev/mtd0 0 1048576 qspi_test
> Copied 1048576 bytes from qspi_test to address 0x00000000 in flash
> $ mtd_debug erase /dev/mtd0 0 1048576
> Erased 1048576 bytes from address 0x00000000 in flash
> $ mtd_debug read /dev/mtd0 0 1048576 qspi_read
> Copied 1048576 bytes from address 0x00000000 in flash to qspi_read
> $ hexdump qspi_read
> 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> *
> 0100000
> $ mtd_debug write /dev/mtd0 0 1048576 qspi_test
> Copied 1048576 bytes from qspi_test to address 0x00000000 in flash
> $ mtd_debug read /dev/mtd0 0 1048576 qspi_read
> Copied 1048576 bytes from address 0x00000000 in flash to qspi_read
> $ sha1sum qspi_test qspi_read
> 2f2f191c7a937eca5db21a1c39e79e7327587cc1  qspi_test
> 2f2f191c7a937eca5db21a1c39e79e7327587cc1  qspi_read
> 
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
>  drivers/mtd/spi-nor/sst.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
> index 99c8a19493f5..43f37d66f73a 100644
> --- a/drivers/mtd/spi-nor/sst.c
> +++ b/drivers/mtd/spi-nor/sst.c
> @@ -113,6 +113,10 @@ static const struct flash_info sst_nor_parts[] = {
>  		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
>  		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ)
>  		.fixups = &sst26vf_nor_fixups },
> +	{ "sst26vf032b", INFO(0xbf2642, 0, 64 * 1024, 64)

Please try with INFO(0xbf2642, 0, 0, 0). You can also have a look
at the debugfs and compare it to your current flags to check that
nothing has changed.

-michael

> +		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
> +		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
> +		.fixups = &sst26vf_nor_fixups },
>  	{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128)
>  		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
>  		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)