[PATCH 1/5] mtd: spi-nor: spansion: Preserve CFR2V[7] when writing MEMLAT

tkuw584924 at gmail.com tkuw584924 at gmail.com
Mon Jun 12 03:04:05 PDT 2023


From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>

CFR2V[7] is assigned to Flash's address mode (3- or 4-ybte) and must not
be changed when writing MEMLAT (CFR2V[3:0]). CFR2V must be read first,
modified only CFR2V[3:0], then written back.

Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
Cc: stable at vger.kernel.org
---
 drivers/mtd/spi-nor/spansion.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index f2f4bc060f5e..7804be3a9f2a 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -27,6 +27,7 @@
 #define SPINOR_REG_CYPRESS_CFR2			0x3
 #define SPINOR_REG_CYPRESS_CFR2V					\
 	(SPINOR_REG_CYPRESS_VREG + SPINOR_REG_CYPRESS_CFR2)
+#define SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK	GENMASK(3, 0)
 #define SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24	0xb
 #define SPINOR_REG_CYPRESS_CFR2_ADRBYT		BIT(7)
 #define SPINOR_REG_CYPRESS_CFR3			0x4
@@ -162,8 +163,17 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	int ret;
 	u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
 
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes,
+					  SPINOR_REG_CYPRESS_CFR2V, 0, buf);
+
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
 	/* Use 24 dummy cycles for memory array reads. */
-	*buf = SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24;
+	*buf &= ~SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK;
+	*buf |= SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24;
 	op = (struct spi_mem_op)
 		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
 					  SPINOR_REG_CYPRESS_CFR2V, 1, buf);
-- 
2.34.1




More information about the linux-mtd mailing list