[PATCH v2 07/17] dt-bindings: mtd: ingenic: Prevent NAND chip unevaluated properties

[Miquel Raynal]

Hi Rob,

robh at kernel.org wrote on Tue, 06 Jun 2023 12:52:00 -0600:

> On Tue, 06 Jun 2023 19:52:36 +0200, Miquel Raynal wrote:
> > List all the possible properties in the NAND chip as per the example and
> > set unevaluatedProperties to false in the NAND chip section.
> > 
> > Cc: Paul Cercueil <paul at crapouillou.net>
> > Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> > ---
> >  Documentation/devicetree/bindings/mtd/ingenic,nand.yaml | 4 ++++
> >  1 file changed, 4 insertions(+)
> >   
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> ./Documentation/devicetree/bindings/mtd/ingenic,nand.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/mtd/raw-nand-chip.yaml

It seems like your automated tooling failed to apply the second patch
in this series (creating raw-nand-chip.yaml). It says "sha1 information
is lacking or useless". This work is based on a recent -rc so I'm not
sure what is "lacking or useless" in this case.

Anyway, do you plan to give this series a look anyway? Or should I
rebase against a specific branch?

Thanks,
Miquèl

> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/ingenic,nand.example.dtb: nand-controller at 1: nand at 1: False schema does not allow {'reg': [[1]], 'nand-ecc-step-size': [[1024]], 'nand-ecc-strength': [[24]], 'nand-ecc-mode': ['hw'], 'nand-on-flash-bbt': True, 'pinctrl-names': ['default'], 'pinctrl-0': [[4294967295]], 'partitions': {'compatible': ['fixed-partitions'], '#address-cells': [[2]], '#size-cells': [[2]], 'partition at 0': {'label': ['u-boot-spl'], 'reg': [[0, 0, 0, 8388608]]}, 'partition at 800000': {'label': ['u-boot'], 'reg': [[0, 8388608, 0, 2097152]]}, 'partition at a00000': {'label': ['u-boot-env'], 'reg': [[0, 10485760, 0, 2097152]]}, 'partition at c00000': {'label': ['boot'], 'reg': [[0, 12582912, 0, 67108864]]}, 'partition at 4c00000': {'label': ['system'], 'reg': [[0, 79691776, 1, 4215275520]]}}}
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/ingenic,nand.example.dtb: nand-controller at 1: nand at 1: Unevaluated properties are not allowed ('nand-ecc-mode', 'nand-ecc-step-size', 'nand-ecc-strength', 'nand-on-flash-bbt', 'partitions', 'reg' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230606175246.190465-8-miquel.raynal@bootlin.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>