[PATCH 0/3] Fix a couple of missing unevaluated properties

[Miquel Raynal]

As discussed with Krzysztof and Chris, it seems like each NAND
controller binding should actually explicitely list all the allowed
properties in a schema and use "unevaluatedProperties: false" in both
the NAND controller and the NAND chip sections. While this restriction
always applied on the controller side, this was not enforced on the
chips side AFAIR.

Link: https://lore.kernel.org/all/a23dd485-a3d9-e31f-be3e-0ab293fcfc4a@linaro.org/

While converting Marvell controller bindings, Chris explicitely pointed
similar bindings which would also trigger errors when using
"unevaluatedProperties: false" because of the reg/partitions/etc
properties not being described. Here is an attempt at making these more
precise and robust.

These change made me realize the qcom,boot-partition property
description was broken, so here is a fix for it.

Thanks,
Miquèl

Miquel Raynal (3):
  dt-bindings: mtd: qcom: Fix a property position
  dt-bindings: mtd: qcom: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: ingenic: Prevent NAND chip unevaluated properties

 .../devicetree/bindings/mtd/ingenic,nand.yaml | 11 +++++
 .../devicetree/bindings/mtd/qcom,nandc.yaml   | 47 ++++++++++++-------
 2 files changed, 42 insertions(+), 16 deletions(-)

-- 
2.34.1