[PATCH v4 05/11] mtd: spi-nor: spansion: switch h28hx's ready() to use vreg_offset

[Tudor Ambarus]

From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>

s28hx is the sole user of cypress_nor_set_octal_dtr, which already
uses vreg_offset to set octal DTR. Switch the ready method to use
vreg_offset as well. This is a preparation patch. The goal is to use
the same s28hx methods for the multi die version of the flash.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
---
 drivers/mtd/spi-nor/spansion.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 94d98b5b0ff1..6d8dd800ba65 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -728,6 +728,7 @@ static int s28hx_t_late_init(struct spi_nor *nor)
 	}
 
 	params->set_octal_dtr = cypress_nor_set_octal_dtr;
+	params->ready = cypress_nor_sr_ready_and_clear;
 	cypress_nor_ecc_init(nor);
 
 	return 0;
-- 
2.34.1