[RESEND PATCH v3 09/11] mtd: spi-nor: spansion: let SFDP determine the flash and sector size

Tudor Ambarus tudor.ambarus at linaro.org
Mon Jul 24 01:12:45 PDT 2023


sector_size is used to determine the flash size and the erase size in
case of uniform erase. n_sectors is used to determine the flash_size.
But the flash size and the erase sizes are determined when parsing SFDP,
let SFDP determine them.

Signed-off-by: Tudor Ambarus <tudor.ambarus at linaro.org>
---
 drivers/mtd/spi-nor/spansion.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 1f2b4a469719..413573cdb4fc 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -875,11 +875,11 @@ static const struct flash_info spansion_nor_parts[] = {
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25fs256t_fixups },
-	{ "s25hl512t",  INFO6(0x342a1a, 0x0f0390, 256 * 1024, 256)
+	{ "s25hl512t",  INFO6(0x342a1a, 0x0f0390, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
-	{ "s25hl01gt",  INFO6(0x342a1b, 0x0f0390, 256 * 1024, 512)
+	{ "s25hl01gt",  INFO6(0x342a1b, 0x0f0390, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
@@ -888,11 +888,11 @@ static const struct flash_info spansion_nor_parts[] = {
 		MFR_FLAGS(USE_CLPEF)
 		FLAGS(NO_CHIP_ERASE)
 		.fixups = &s25hx_t_fixups },
-	{ "s25hs512t",  INFO6(0x342b1a, 0x0f0390, 256 * 1024, 256)
+	{ "s25hs512t",  INFO6(0x342b1a, 0x0f0390, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
-	{ "s25hs01gt",  INFO6(0x342b1b, 0x0f0390, 256 * 1024, 512)
+	{ "s25hs01gt",  INFO6(0x342b1b, 0x0f0390, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
@@ -903,22 +903,22 @@ static const struct flash_info spansion_nor_parts[] = {
 		.fixups = &s25hx_t_fixups },
 	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
 		FLAGS(SPI_NOR_NO_ERASE) },
-	{ "s28hl512t",   INFO(0x345a1a,      0, 256 * 1024, 256)
+	{ "s28hl512t",   INFO(0x345a1a,      0, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
-	{ "s28hl01gt",   INFO(0x345a1b,      0, 256 * 1024, 512)
+	{ "s28hl01gt",   INFO(0x345a1b,      0, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
-	{ "s28hs512t",   INFO(0x345b1a,      0, 256 * 1024, 256)
+	{ "s28hs512t",   INFO(0x345b1a,      0, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
-	{ "s28hs01gt",   INFO(0x345b1b,      0, 256 * 1024, 512)
+	{ "s28hs01gt",   INFO(0x345b1b,      0, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
-- 
2.34.1




More information about the linux-mtd mailing list