[RESEND PATCH v3 04/11] mtd: spi-nor: spansion: switch set_octal_dtr method to use vreg_offset

[Tudor Ambarus]

From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>

All the Infineon flashes that currently support octal DTR mode
define the optional SCCR SFDP table, thus all retrieve vreg_offset.
Switch all the available octal DTR Infineon flashes to use the
volatile register offset to set the configuration registers. The goal
is to have a single pair of methods for both single/multi-chip package
devices.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
---
 drivers/mtd/spi-nor/spansion.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 51eabddf2b16..dc4841891b74 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -6,6 +6,7 @@
 
 #include <linux/bitfield.h>
 #include <linux/device.h>
+#include <linux/errno.h>
 #include <linux/mtd/spi-nor.h>
 
 #include "core.h"
@@ -202,14 +203,18 @@ static int cypress_nor_set_octal_dtr_bits(struct spi_nor *nor, u64 addr)
 
 static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 {
+	const struct spi_nor_flash_parameter *params = nor->params;
 	u8 *buf = nor->bouncebuf;
+	u64 addr;
 	int ret;
 
-	ret = cypress_nor_set_memlat(nor, SPINOR_REG_CYPRESS_CFR2V);
+	addr = params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR2;
+	ret = cypress_nor_set_memlat(nor, addr);
 	if (ret)
 		return ret;
 
-	ret = cypress_nor_set_octal_dtr_bits(nor, SPINOR_REG_CYPRESS_CFR5V);
+	addr = params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR5;
+	ret = cypress_nor_set_octal_dtr_bits(nor, addr);
 	if (ret)
 		return ret;
 
@@ -247,9 +252,11 @@ static int cypress_nor_set_single_spi_bits(struct spi_nor *nor, u64 addr)
 static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 {
 	u8 *buf = nor->bouncebuf;
+	u64 addr;
 	int ret;
 
-	ret = cypress_nor_set_single_spi_bits(nor, SPINOR_REG_CYPRESS_CFR5V);
+	addr = nor->params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR5;
+	ret = cypress_nor_set_single_spi_bits(nor, addr);
 	if (ret)
 		return ret;
 
@@ -714,7 +721,15 @@ static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor,
 
 static int s28hx_t_late_init(struct spi_nor *nor)
 {
-	nor->params->set_octal_dtr = cypress_nor_set_octal_dtr;
+	struct spi_nor_flash_parameter *params = nor->params;
+
+	if (!params->n_dice || !params->vreg_offset) {
+		dev_err(nor->dev, "%s failed. The volatile register offset could not be retrieved from SFDP.\n",
+			__func__);
+		return -EOPNOTSUPP;
+	}
+
+	params->set_octal_dtr = cypress_nor_set_octal_dtr;
 	cypress_nor_ecc_init(nor);
 
 	return 0;
-- 
2.34.1