[PATCH v2 1/2] dt-bindings: mtd: Add SEAMA partition bindings

Rob Herring robh at kernel.org
Wed Jul 5 12:51:54 PDT 2023


On Wed, Jul 05, 2023 at 12:17:46PM +0200, Linus Walleij wrote:
> This types of NAND partitions appear in OpenWrt and
> U-Boot.
> 
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> ChangeLog v1->v2:
> - Fix up the binding to be childless
> ---
>  .../bindings/mtd/partitions/partitions.yaml        |  1 +
>  .../devicetree/bindings/mtd/partitions/seama.yaml  | 50 ++++++++++++++++++++++
>  2 files changed, 51 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
> index 2edc65e0e361..9bd0a8d800da 100644
> --- a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
> +++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
> @@ -21,6 +21,7 @@ oneOf:
>    - $ref: linksys,ns-partitions.yaml
>    - $ref: qcom,smem-part.yaml
>    - $ref: redboot-fis.yaml
> +  - $ref: seama.yaml

I think this is in the wrong place. These should be device level 
partitioning schemas, not an individual partition type. (Though nesting 
is possible)

>  
>  properties:
>    compatible: true
> diff --git a/Documentation/devicetree/bindings/mtd/partitions/seama.yaml b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml
> new file mode 100644
> index 000000000000..5ed7764bba69
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/partitions/seama.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Seattle Image Partitions
> +
> +description: The SEAttle iMAge (SEAMA) partition is a type of partition
> +  used for NAND flash devices. This type of flash image is found in some
> +  D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L,
> +  DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79
> +  (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This partition type
> +  does not have children defined in the device tree, they need to be
> +  detected by software.
> +
> +allOf:
> +  - $ref: partition.yaml#
> +
> +maintainers:
> +  - Linus Walleij <linus.walleij at linaro.org>
> +
> +select: false

Remove this and your example will fail. You need unevaluatedProperties.

There's a problem in partitions.yaml. It never gets applied, so this 
schema never gets applied. The default 'select' is generated based on 
$nodename or compatible, but it has neither. This needs some more 
thought on how to fix given the variable way partitions can be combined. 
Probably at a minimum, all the 'select: false' need to be removed. 

> +
> +properties:
> +  compatible:
> +    const: seama
> +
> +  '#address-cells': false
> +
> +  '#size-cells': false
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    partitions {
> +        compatible = "fixed-partitions";
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        partition at 0 {
> +            compatible = "seama";
> +            reg = <0x0 0x800000>;
> +            label = "firmware";
> +        };
> +    };
> 
> -- 
> 2.34.1
> 



More information about the linux-mtd mailing list