[PATCH v3 5/5] mtd: rawnand: brcmnand: Fix mtd oobsize

[Miquel Raynal]

Hi William,

william.zhang at broadcom.com wrote on Tue, 4 Jul 2023 17:50:28 -0700:

> Hi Miquel,
> 
> On 07/04/2023 08:30 AM, Miquel Raynal wrote:
> > Hi William,
> > 
> > william.zhang at broadcom.com wrote on Tue, 27 Jun 2023 12:37:38 -0700:
> >   
> >> brcmnand controller can only access the flash spare area up to certain
> >> bytes based on the ECC level. It can be less than the actual flash spare
> >> area size. For example, for many NAND chip supporting ECC BCH-8, it has
> >> 226 bytes spare area. But controller can only uses 218 bytes. So brcmand
> >> driver overrides the mtd oobsize with the controller's accessible spare
> >> area size. When the nand base driver utilizes the nand_device object, it
> >> resets the oobsize back to the actual flash spare aprea size from
> >> nand_memory_organization structure and controller may not able to access
> >> all the oob area as mtd advises.
> >>
> >> This change fixes the issue by overriding the oobsize in the
> >> nand_memory_organization structure to the controller's accessible spare
> >> area size.  
> > 
> > I am clearly not a big fan of this solution. memorg should be and
> > remain a read only object. Can you please find another solution?
> >   
> I was debating on this too but I don't see option because there is no other hooks after nanddev_init to set the mtd->oobsize as far as I can see and I see there were similar fixes for other controller drivers after the nand device object init was committed, for example:
> Fixes: 629a442cad5f ("mtd: rawnand: Fill memorg during detection")

You are right, that was indeed the first approach, I'll remain on this
path then. Thanks for the pointer.

> 
> I will think through this again but I am open to any suggestion.
> 
> >>
> >> Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object")
> >> Signed-off-by: William Zhang <william.zhang at broadcom.com>
> >>
> >> ---
> >>
> >> Changes in v3: None
> >> Changes in v2: None
> >>
> >>   drivers/mtd/nand/raw/brcmnand/brcmnand.c | 7 +++++--
> >>   1 file changed, 5 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> >> index 407bf79cbaf4..39c7f547db1f 100644
> >> --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> >> +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> >> @@ -2647,6 +2647,8 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
> >>   	struct nand_chip *chip = &host->chip;
> >>   	const struct nand_ecc_props *requirements =
> >>   		nanddev_get_ecc_requirements(&chip->base);
> >> +	struct nand_memory_organization *memorg =
> >> +		nanddev_get_memorg(&chip->base);
> >>   	struct brcmnand_controller *ctrl = host->ctrl;
> >>   	struct brcmnand_cfg *cfg = &host->hwcfg;
> >>   	char msg[128];
> >> @@ -2668,10 +2670,11 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
> >>   	if (cfg->spare_area_size > ctrl->max_oob)
> >>   		cfg->spare_area_size = ctrl->max_oob;
> >>   	/*
> >> -	 * Set oobsize to be consistent with controller's spare_area_size, as
> >> -	 * the rest is inaccessible.
> >> +	 * Set mtd and memorg oobsize to be consistent with controller's
> >> +	 * spare_area_size, as the rest is inaccessible.
> >>   	 */
> >>   	mtd->oobsize = cfg->spare_area_size * (mtd->writesize >> FC_SHIFT);
> >> +	memorg->oobsize = mtd->oobsize;  
> >>   >>   	cfg->device_size = mtd->size;  
> >>   	cfg->block_size = mtd->erasesize;  
> > 
> > 
> > Thanks,
> > Miquèl
> >   


Thanks,
Miquèl