[PATCH v2 1/3] dt-bindings: intel,ixp4xx-expansion-bus: split out peripheral properties

[Rob Herring]

On Fri, Jan 27, 2023 at 10:32:15AM +0100, Krzysztof Kozlowski wrote:
> The properties of devices in IXP4xx expansion bus need to be also
> applied to actual devices' bindings.  Prepare for this by splitting them
> to separate intel,ixp4xx-expansion-peripheral-props binding, just like
> other memory-controller peripheral properties.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> ---
>  ...intel,ixp4xx-expansion-bus-controller.yaml | 64 +--------------
>  ...tel,ixp4xx-expansion-peripheral-props.yaml | 80 +++++++++++++++++++

Kind of odd to have these in 2 directories. Can we move 
intel,ixp4xx-expansion-bus-controller.yaml to 
bindings/memory-controllers/?

Or maybe all the external/parallel bus interfaces need their own 
directory?

>  .../mc-peripheral-props.yaml                  |  1 +
>  3 files changed, 82 insertions(+), 63 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
> 
> diff --git a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
> index 5fb4e7bfa4da..a771796ec499 100644
> --- a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
> +++ b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
> @@ -56,69 +56,7 @@ patternProperties:
>      description: Devices attached to chip selects are represented as
>        subnodes.
>      type: object
> -
> -    properties:
> -      intel,ixp4xx-eb-t1:
> -        description: Address timing, extend address phase with n cycles.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        maximum: 3
> -
> -      intel,ixp4xx-eb-t2:
> -        description: Setup chip select timing, extend setup phase with n cycles.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        maximum: 3
> -
> -      intel,ixp4xx-eb-t3:
> -        description: Strobe timing, extend strobe phase with n cycles.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        maximum: 15
> -
> -      intel,ixp4xx-eb-t4:
> -        description: Hold timing, extend hold phase with n cycles.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        maximum: 3
> -
> -      intel,ixp4xx-eb-t5:
> -        description: Recovery timing, extend recovery phase with n cycles.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        maximum: 15
> -
> -      intel,ixp4xx-eb-cycle-type:
> -        description: The type of cycles to use on the expansion bus for this
> -          chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        enum: [0, 1, 2]
> -
> -      intel,ixp4xx-eb-byte-access-on-halfword:
> -        description: Allow byte read access on half word devices.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        enum: [0, 1]
> -
> -      intel,ixp4xx-eb-hpi-hrdy-pol-high:
> -        description: Set HPI HRDY polarity to active high when using HPI.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        enum: [0, 1]
> -
> -      intel,ixp4xx-eb-mux-address-and-data:
> -        description: Multiplex address and data on the data bus.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        enum: [0, 1]
> -
> -      intel,ixp4xx-eb-ahb-split-transfers:
> -        description: Enable AHB split transfers.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        enum: [0, 1]
> -
> -      intel,ixp4xx-eb-write-enable:
> -        description: Enable write cycles.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        enum: [0, 1]
> -
> -      intel,ixp4xx-eb-byte-access:
> -        description: Expansion bus uses only 8 bits. The default is to use
> -          16 bits.
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        enum: [0, 1]
> +    $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
> new file mode 100644
> index 000000000000..8f782c80e88b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Peripheral properties for Intel IXP4xx Expansion Bus
> +
> +description: |

Don't need '|'.

> +  The IXP4xx expansion bus controller handles access to devices on the
> +  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
> +  including IXP42x, IXP43x, IXP45x and IXP46x.
> +
> +maintainers:
> +  - Linus Walleij <linus.walleij at linaro.org>
> +
> +properties:
> +  intel,ixp4xx-eb-t1:
> +    description: Address timing, extend address phase with n cycles.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 3
> +
> +  intel,ixp4xx-eb-t2:
> +    description: Setup chip select timing, extend setup phase with n cycles.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 3
> +
> +  intel,ixp4xx-eb-t3:
> +    description: Strobe timing, extend strobe phase with n cycles.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 15
> +
> +  intel,ixp4xx-eb-t4:
> +    description: Hold timing, extend hold phase with n cycles.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 3
> +
> +  intel,ixp4xx-eb-t5:
> +    description: Recovery timing, extend recovery phase with n cycles.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 15
> +
> +  intel,ixp4xx-eb-cycle-type:
> +    description: The type of cycles to use on the expansion bus for this
> +      chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2]
> +
> +  intel,ixp4xx-eb-byte-access-on-halfword:
> +    description: Allow byte read access on half word devices.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +
> +  intel,ixp4xx-eb-hpi-hrdy-pol-high:
> +    description: Set HPI HRDY polarity to active high when using HPI.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +
> +  intel,ixp4xx-eb-mux-address-and-data:
> +    description: Multiplex address and data on the data bus.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +
> +  intel,ixp4xx-eb-ahb-split-transfers:
> +    description: Enable AHB split transfers.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +
> +  intel,ixp4xx-eb-write-enable:
> +    description: Enable write cycles.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +
> +  intel,ixp4xx-eb-byte-access:
> +    description: Expansion bus uses only 8 bits. The default is to use
> +      16 bits.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
> index 53ae995462db..5acfcad12bb7 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
> @@ -34,5 +34,6 @@ required:
>  # The controller specific properties go here.
>  allOf:
>    - $ref: st,stm32-fmc2-ebi-props.yaml#
> +  - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
>  
>  additionalProperties: true
> -- 
> 2.34.1
>